Needed :instructions for an HKS TT - Mazdaspeed 3

[Nutari]

Thank you.

Yes, I know it wasn't necessary but I got a really good deal.

It has 7 wires.

Red
Green

Blue with two red stripes
blue with one red stripe
Gray with red stripe
black with red stripe
Brown with blue stripe.

 

[mdl247]

is it a type 0 or type 1?

 

[Nutari]

is it a type 0 or type 1?

no idea. I pm'ed the guy I bought it from and he hasn't responded yet.

 

[mdl247]

http://www.hksusa.com/faq/?ID=1647 well this is what i found for hks tt so far

 

[Nutari]

http://www.hksusa.com/faq/?ID=1647 well this is what i found for hks tt so far

I saw that. I need to figure out what wires to tap in the speed 3. I guess i'll just wait till the XEDE comes in and do both at the same time.

 

[JOMO]

no idea. I pm'ed the guy I bought it from and he hasn't responded yet.

Its the type1. Soory about the directions. We scrapped them after the install.

 

[Nutari]

Its the type1. Soory about the directions. We scrapped them after the install.

am I missing anything? The directions from the HKS website say im supposed to have a 3pin connector?

 

[GDMOOD]

installing the tt

The turbo timer instructions should be downloadable from the hks site. If not you should email them for it. I just installed a greddy tt which i bought off ebay and it came with japanese instructions. (shocked) I downloaded an english version from the greddy site.

In terms of installing it. It was real easy with the help of a friend thats installed lots of times. The wires in the steering wheel column you need to splice to are:

12V red & blk/red
Ignition green/yellow
2nd ignition pink/yellow

You should test with a multimeter and turning your key in the ignition though that this is the same for your car.

The park brake wire is easy to find.

With auto timing tt's you also need to splice it into the vehicle speed sensor. This I haven't found yet and need a wiring diagram for or someone to tell me how and which wire to access in the dash

 

[Nutari]

The turbo timer instructions should be downloadable from the hks site. If not you should email them for it. I just installed a greddy tt which i bought off ebay and it came with japanese instructions. (shocked) I downloaded an english version from the greddy site.

In terms of installing it. It was real easy with the help of a friend thats installed lots of times. The wires in the steering wheel column you need to splice to are:

12V red & blk/red
Ignition green/yellow
2nd ignition pink/yellow

You should test with a multimeter and turning your key in the ignition though that this is the same for your car.

The park brake wire is easy to find.

With auto timing tt's you also need to splice it into the vehicle speed sensor. This I haven't found yet and need a wiring diagram for or someone to tell me how and which wire to access in the dash

Are you talking about these really fat wires here?

 

[Nutari]

(bump) I have my steering column apart waiting for an answer.

 

[terbow]

those look like the right ones (the ones on my msp are fat as well), however, if thats directly to the key cylendar, id go after the connector (on the underside) if the wires are the same color on the bottom. the directions i beleive tell u to tap in after the connector.

 

[Nutari]

those look like the right ones (the ones on my msp are fat as well), however, if thats directly to the key cylendar, id go after the connector (on the underside) if the wires are the same color on the bottom. the directions i believe tell u to tap in after the connector.

I'll trust you. They match up with the wire colors described below.

 

[terbow]

in terbow we trust...

 

[Nutari]

yup yup.

 

[GDMOOD]

congrats on the install. does your TT have a wire to connect to the Vehicle Speed Sensor to operate an Auto timer mode?

 

[Nutari]

congrats on the install. does your TT have a wire to connect to the Vehicle Speed Sensor to operate an Auto timer mode?

yup. Its a type one. I didnt connect the RPM wire or the Speed sensor wire. I dont know where to find them yet.

 

[dropxnow]

12V red & blk/red
Ignition green/yellow
2nd ignition pink/yellow

what do you mean by red & blk/red?

i see a fat red, a fat blk/red, a skinny red, and a skinny blk/red

which one did you tap into for the 12v constant?

 

[Craighjr]

The solid red fat one is the one you should want.