mrdouble99
Member
- :
- Mazdaspeed3
241whp and 257WTQ
I'm gonna scan the dyno sheet tomorow
I'm gonna scan the dyno sheet tomorow
My stock speed3 dyno #
- Thread starter mrdouble99
- Start date
The ManLaw
The Manlaw of Want
- :
- 15cx5 soon 20cx9
really? damn nice! what was ambient temp and humidity?
mrdouble99
Member
- :
- Mazdaspeed3
Clear and sunny day around 64f/18c
The ManLaw
The Manlaw of Want
- :
- 15cx5 soon 20cx9
very nice numbers. you know what time it is? modding time.
mrdouble99
Member
- :
- Mazdaspeed3
I finaly took a picture of the dyno sheet
Stock Mazdaspeed3: 13.400@102.58 ? ? ? ? ? ?
With respect, this does not seem possible on a stock Speed3, and ET seems inconsistent with trap speed. What is this all about?
Nice stock dyno numbers, but 13.4's with 241 whp does not seem to match either. I'd think it would take 270-280 whp or even a bit better to get to those numbers and the trap speed would be 105-106, would it not?
Please forgive the skepticism. There must be an explanation I am missing.
With respect, this does not seem possible on a stock Speed3, and ET seems inconsistent with trap speed. What is this all about?
Nice stock dyno numbers, but 13.4's with 241 whp does not seem to match either. I'd think it would take 270-280 whp or even a bit better to get to those numbers and the trap speed would be 105-106, would it not?
Please forgive the skepticism. There must be an explanation I am missing.
mrdouble99
Member
- :
- Mazdaspeed3
What can i say ?
The dyno was a mustang md250 and the car was cold.
241 whp was the first run and the best one.
I went to the drag strip, the day was cold, the track was sticky and my Toyo RA1 was at 20psi.
I have done lots of 13,5 and 13,4 was my best run
Trap speed this day was slower for everyone.
Next year i'm gonna go back to the dyno and drag strip and i'm gonna make some vids of both.
b00bs for n00bs
Banned
if he has traction, 13.4 @ 102 seems possible.
102 on a stock speed, i haven't seen, but whatever.
why is your name danSPEED6?
if you drive a mazdaspeed3?
102 on a stock speed, i haven't seen, but whatever.
why is your name danSPEED6?
if you drive a mazdaspeed3?
mrdouble99
Member
- :
- Mazdaspeed3
Because i had a speed6 and now i have a speed3
b00bs for n00bs
Banned
ahhh thank you.
Ah, the driver mod. And that skill is far more important than many realize. Launching fwd cars like ours is difficult and is an acquired skill I have not come close to perfecting.
I'm running high 13.4- low 13.5's with mods listed below, but trap speeds are 105-106. My problem is that I need the driver mod. I can't get better than 2.3 60 ft times on stock tires, (the occasional 2.2) probably due to not putting enough time to perfect launch. New tires to come soon, but driver mod seriously needed!
i used to trap 103mph with my 03.5 MSP, best ET was 14.0 or 14.1 though
driver has lots to do with it. i know my car could've done much better, i just wasnt good enough. So with good tires, traction and on a cold day, i can see this happening
DanSpeed6, where did you get your car dynoed? I might go to Technika in IleBizard some time in the next couple of months to dyno my 6
driver has lots to do with it. i know my car could've done much better, i just wasnt good enough. So with good tires, traction and on a cold day, i can see this happening
DanSpeed6, where did you get your car dynoed? I might go to Technika in IleBizard some time in the next couple of months to dyno my 6
b00bs for n00bs
Banned
stock tires suck pretty much. little grip, and they're only 7 wide.
new tires and wider wheels will help with 60' times
new tires and wider wheels will help with 60' times
Drivermod ftw...Before my ms3 I had a 07 civic si and was in the civic forums and this 1 guy had a 2006 civic si coupe..and all he had was intake,header,exhaust-which means about 200 whp..stock k20z3 is around 175-180whp....anyways with DR tires he was running 13.5 at 105 mph..Which is some pretty dam good launching imo.
b00bs for n00bs
Banned
my run at 13.9 at 104 makes me feel like an asshole.
i've seen people trap 104 at 13.2.
fml
i've seen people trap 104 at 13.2.
fml
lynnriderm6
Member
if you dont have slicks dont bother launching the car..lol just agressivly roll of the line then around like 3 grand punch it..better then sitting there spinning then shifting into 2nd to early then bogging ...but just my 2 cents lol
b00bs for n00bs
Banned
make your own slicks. take the stockers out for a drive in a parking lot...do lots of burnouts...then go for lots of drives on off and on ramps in california...they are normally 180-360 degree turns.
no more tread
traction?
hahahah
no more tread
traction?
hahahah
