Injen CAI with foglights.

[d0uble_b]

Hey I just got a 03.5 Titanium Grey MSP and I'm planning on adding a couple of mods but I have a question first. I want to get the adapters to put fogs on a 03.5 and I wnat to get an Injen CAI but I read on someone's post how the INjen gets air from the duct that the fogs go in. I was jsut wondering what would happen if I got both. If they don't work together I'll just have to forget the fogs. Thanks for any help.

 

[tonkabui]

considering the stock foglight grille completely covers the hole, and beyond that, there are just little slits where a fog light would be mounted to on a bracket, having the injen isn't going to present you with any problems. if you're worried about the injen not getting enough air, then you should also worry about the injen sucking up water in the rain. (both of which are kinda moot points)

 

[Swerny]

considering the stock foglight grille completely covers the hole, and beyond that, there are just little slits where a fog light would be mounted to on a bracket, having the injen isn't going to present you with any problems. if you're worried about the injen not getting enough air, then you should also worry about the injen sucking up water in the rain. (both of which are kinda moot points)

Well said. I agree completely.

 

[CatD399]

if getting air in your cai is that much of a priority, you can always cut a hole in the plastic flap under the car...something like corksport did..

 

[d0uble_b]

Thanks that really helped.

 

[Captain KRM P5]

here are your intake options for the mazdaspeed protege : http://www.mazda3online.com/product_info.php?cPath=27_33&products_id=71 AND http://www.mazda3online.com/product_info.php?cPath=27_33&products_id=259

and here is the foglight kit for the mazdaspeed proteges without the stock foglights:
http://www.mazda3online.com/product_info.php?cPath=27_79&products_id=204

they are all compatible