Hub Centric Wheel Spacers

UPDATE: NOW SHIPPING!

IMG_20101223_142524.jpg


IMAG0002.jpg



Since I know some people have been looking for wheel spacers lately, I took it upon myself to do some investigating and some research. I have purchased an old set of Turfburn's hub-centric spacers to compare to.

All of my spacers will be made to fit vehicles with a 67.1mm bore and a 5X114.3 bolt pattern. These will fit: Protege, Mazda3, Mazda6, and possibly other vehicles. They will be made of aluminum and made to order. Here are the details:

3mm (1/8") spacers: $25 a pair

5mm (3/16") spacers: $30 a pair

8mm (5/16") spacers: $40 a pair

I will offer a $5 discount if you order a full set (total of 4) of either 3mm, 5mm, 8mm, or mixed. I can also make these in different sizes, such as 10mm, by request (extra charge). These prices are for the parts shipped.


PAYMENT: For those in the US, please send your payment to the PayPal email address "outrage_display@hotmail.com". Please include your Mazdas247 username and your desired spacers. For those outside of the US, please PM your shipping address and I will get a shipping quote ASAP (I will cover the first $5). Also, this is not my primary email, so if you have any questions and/or do send payment, please PM here so I am notified right away.
 
Last edited:
Just wanna be certain. The stock studs can be used with the 8mm spacers?
Someone that's actually running them on stock studs please answer :)
Would sift through the thread but way too many posts.
 
I have the 8mm spacers on the front lugs for my MZ5 with no problems. Barely. Try your current lug nuts and see if you have at least 10-12 turns of thread engagement right now. You'll lose 5.3 turns (8mm divided by 1.5mm per turn) with the 8mm spacers, so you want to make sure you have enough threads left to interface with your nuts after the spacers are on.
 
Just wanna be certain. The stock studs can be used with the 8mm spacers?
Someone that's actually running them on stock studs please answer :)
Would sift through the thread but way too many posts.

I've been really busy and haven't posted yet but I got a pair of 8mm spacers and immediately threw them on the front. I am impressed with them they are excellent quality and fit perfect, very fast on the shipping too as i'm pretty sure they were made to order. I plan on getting a set of 15mm with built in lugs for the front and moving the 8mm to the rear but i'm running them on the stock lugs in the front for now.
Spacers:
f4facd3b.jpg

Perfect Fit:
5afeadc1.jpg

Before
add3bf0c.jpg

After
547b378c.jpg

Before
ccbbf424.jpg

After
9c74b218.jpg

Before
c3dcb0cd.jpg

After
03769a2b.jpg

After
bb4d0e5b.jpg

After
768e6b9e.jpg
 
wow super fast shipping, easy transaction, great businessman. got em in today will be posting pics later with them on. :)
Before:
IMG_20121217_215421.jpg
IMG_20121217_215358.jpg

After:
IMG_20121218_191310.jpg
IMG_20121218_191321.jpg
 
Last edited:
Good weather is just around the corner, especially in snow territory... get your orders in now so you will be ready when you swap over your rims!
 
I'm lowered on S.techs and want 5mm spacers. would i rub with MSP wheels w/ 205/40/17 tires?

Best way to check what size spacers would work with your set up is to get a scale/ruler/tape measure, put it tight against the tire, and look down from above the fender the best you can.

Everybody's drop/setup is never the same, this is the easiest and best way to re-assure yourself of what you need.
 
Bump. Possibly going to be my last run since orders have slowed down; doesn't make since for me to keep paying the AMM fee for only a handful of orders every month.
 
Are these just available to the Protege platform or is this something that the other models can use as well. I'm just wondering as I don't own another Mazda but would hate to see this service go away.
 
Are these just available to the Protege platform or is this something that the other models can use as well. I'm just wondering as I don't own another Mazda but would hate to see this service go away.

Any vehicles that use the 67.1mm hub bore and 114X5 bolt pattern. I can also make others upon request.
 
Just put in my 7mm spacers. Was perfect to clear my calipers with my 19" RH. I ordered extended studs. The mere 4 turns I got on my wheel nuts got me kinda sketchy. Besides that great quality. Also the diameter is a little larger then the back of my rims.

Great spacers, great price, great seller
 
Last edited:
Back