Protegebuddy
Member
- :
- 2003 Spicy
I meet a fellow MSP owner yesterday and he had a FMIC installed said that the MAF will require a 2.1/2 to 2.3/4 coupler cause the 2.1/2 to 2.1/2 wouldn't fit.... true?
How To: Ebay FMIC
- Thread starter Wagonbacker9
- Start date
- :
- '13 CWP MS3 & '16 Mazda6 GT
plenty of people have been able to squeeze the 2.5" coupler onto the MAF.
Protegebuddy
Member
- :
- 2003 Spicy
Okay, hope so, so then this will work for the turbo right?
http://www.siliconeintakes.com/prod..._id=7&osCsid=0bdc0a5dc67e292832e3265bcd439ed4
My kit is 2.5
http://www.siliconeintakes.com/prod..._id=7&osCsid=0bdc0a5dc67e292832e3265bcd439ed4
My kit is 2.5
Protegebuddy
Member
- :
- 2003 Spicy
I know but no money in paypal account till tomorrow. Just bought. My install will be coming this weekend hopefully!
Not sure if u guys have signed up for eBay bucks,but it helps. I did a free 30 day trial Netflix but thru eBays site and received $15 in eBay bucks.I will cancel b4 the 30 days and be charged nothing and still have free $15 to spend on anything lol. There are also other trial packages on there also that give u eBay bucks. It all helps
- :
- 1989 RX-7 GXL Blaze Red
bend my nail, lolz
Protegebuddy
Member
- :
- 2003 Spicy
Just going to throw this out there, I'm kinda laughing at the idea, but I have a greddy RS bov that I am going to be using and I need a gasket for it. Think if i find one that would fit that a random thermostat gasket would work?
Wagonbacker9
Member
- :
- 2004 'Hoe
if I had it to do again, I'd have moved the core up with a trimmed crash bar.
- :
- '13 CWP MS3 & '16 Mazda6 GT
well I'll have to cut enough of it off for the intercooler and the 90 degree couplers to fit under it because of the orientation I painted it in lol
SpeedAdiction20
Member
- :
- 2003 MAZDASPEED Protege
ya what nails? lol but yes they will fit, I noticed the cheaper ebay/RX racing or whatever couplers were able to be sqeezed onto the MAF sensor, but the vibrant couplers I had from my smic kit would not, because the walls on them were slightly thicker.. but you should be fine, I just used a tiny bit of WD-40 on the outside of the MAF area to slide them on, and yes I cleaned up any excess around the area and I had some MAF cleaner there as well
but ya evilmonkey just go slow enough and start out by only cutting a little bit to make it flush with the bumper and test fit everything, it will take more time but its better than cutting too much and then being screwed later on.. but actually I re-read what you said and I understand better what you are actually talking about, but you will be fine, just stick your IC with the couplers over the bumper support kind of and trace what you need cut out depending on how you plan to mount it, this way you won't cut more than you have to and it will make fitment much much easier, just remember to take a file and dull the edges, and I would paint the areas you cut from the bumper support so it doesn't rust
- :
- '13 CWP MS3 & '16 Mazda6 GT
thanks for the help! 
shane02pro5
25ish_psi
- :
- New Caney TX
Some hairspray on all connections...
- :
- '13 CWP MS3 & '16 Mazda6 GT
lol yeah, I've heard the hairspray thing before. Gotta go pick me up some aquanet! lol
shane02pro5
25ish_psi
- :
- New Caney TX
I prefer Rave but
- :
- 1989 RX-7 GXL Blaze Red
lolz.
Protegebuddy
Member
- :
- 2003 Spicy
Hey all, just about half way done with my install and everthing is going great! 2.5" couplers will work going over the MAF, all I had to do was dunk the couplers in boiling water and they slid right over. Only had to cut one tiny piece of the frame (so far), super tiny flimsy steel tab... idk what to call it. Will have pics up later tonight some time, can't wait!!!!!!!!!!
INeedMoarLow
Member
- :
- slammed 02 protege5
anybody have 2 spare 2.5" straight couplers and clamps they could spare?? ill pay shipping on them
just ordered a couple and didnt change mailing address so they wne to my ex.... they "return to sender" all my mail that goes there D:
lack of thinking = FAIL
just ordered a couple and didnt change mailing address so they wne to my ex.... they "return to sender" all my mail that goes there D:
lack of thinking = FAIL
- :
- '13 CWP MS3 & '16 Mazda6 GT
Cutting the bumper support yesterday took some time but was beneficial I think. I got all the stock stuff removed and intercooler mounted. Just have to run piping next.
Test fit after intercooler installed
Test fit after intercooler installed
Protegebuddy
Member
- :
- 2003 Spicy
I just got done with my install and everything went great but no the car wants to die after I am driving and put it in neutral or after I just rev in while its idling .... never died or no check engine light on .... everything is connected too so Idk... thoughts?
