haltech p1000 HELP

[racerx43269]

ok... so i have trigger... it counts well.... but no spark.. im trying to set my timing and failing... anyone have any ideas? a walk through or something... hell base settings....

 

[Maxx Mazda]

You have a trigger, how bout a home signal?

 

[C. Ludwig]

First, what is the trigger at last home count? Are you using a cam sensor as well, or just the crank trigger?

Second, what are your ignition settings? Stock coils?

 

[racerx43269]

Using home... I have to check because i gave up for a few days... I decided to buy a ra 10 because my came aren't picking up a signal.. And yes stock coils.. I think the firing order is off..

 

[Maxx Mazda]

Firing order? Youre running batch or multipoint. There is no firing order. If you're using the CMP sensor for a home you need to run the 626 exhaust cam gear.

Did you read my HALTECH install thread at all?

 

[Maxx Mazda]

Is your spark edge set to rising or falling? If it was set to rising you fried your coils.

 

[racerx43269]

yes i read your haltech install.... and my coils are good... i learned that lesson already. the p1000 haltechs have a firing order on the main screen

 

[Maxx Mazda]

Why do you have your coils set to constant duty if you're using the stock coils? They're constant charge.

Try 5ms to start, fix timing at 15*. Once you put that 626 cam gear on that is.

 

[racerx43269]

Ok.. will try that

 

[Maxx Mazda]

The 626 cam gear can be found at most local junkyards.

 

[racerx43269]

lol ill try and see tomorrow... i googled it and looked and looked and havent found anything just yet.... is the 626 cam a hall pickup? or is it just generally different from the fs? obviously i need the cam sensor too.... but something that is odd.. is why isnt the haltech picking up the protege cam sensor? ( i have taken 2 of the three lobes off... however it still isnt picking them up at all...

 

[racerx43269]

perhapps this one?
http://cgi.ebay.com/ebaymotors/00-01-02-Mazda-626-2-5L-Right-Camshaft-Pulley-/390285548115

 

[C. Ludwig]

Post your trigger settings. Also, again, what is your "trigger count at last home" value. That will tell you whether or not your seeing the cam signal.

 

[Maxx Mazda]

The 626 sensor has only one pickup, but it's in a different orientation compared to the protege one IIRC. I have a few spare gears in my shop, I'll have a look see next time I'm out there.

 

[Maxx Mazda]

perhapps this one?
http://cgi.ebay.com/ebaymotors/00-01-02-Mazda-626-2-5L-Right-Camshaft-Pulley-/390285548115

Needs to be a 626 FS 2.0 pulley.