Looks like I need to get back into my theory.
Group Buy: 505 Intake Manifold Round 2
- Thread starter 505zoom
- Start date
- Status
Looks like I need to get back into my theory.
Oh hello... late night delivery ftw.
The batteries in my scale are toast, but the new floor plate design definitely shaved some overall weight. Even with the EGR flange on there it is a lot lighter than the first batch manifolds were. I'll get a measurement on that tomorrow while I test fit it.
The batteries in my scale are toast, but the new floor plate design definitely shaved some overall weight. Even with the EGR flange on there it is a lot lighter than the first batch manifolds were. I'll get a measurement on that tomorrow while I test fit it.
- :
- 2003.5 Mazdaspeed Protege
Nice work
2.0t03speed
Member
- :
- 08.5 CWP Speed 3
OMFG i want the new fuel rail mounts on my mani lol.
SeR_Cyclops
Member
- :
- Mazdaspeed Protege
No joke the new mounts are awesome!
- :
- 2003.5 Mazdaspeed Protege
Will the new fuel rail mounts work with a perrin fuel rail?
- :
- 2003.5 Mazdaspeed Protege
And do you know the location of the 1/4'' npt port for the vacume line cuz ill be using a catch can for the pcv
bikingpro5
Member
- :
- 03 Protege5
- :
- 2003.5 Mazdaspeed Protege
Thanksim just trying to get all the info to make my custom catch cans
bikingpro5
Member
- :
- 03 Protege5
should be able to make it fit this manifold like any other manifold, its just the need for vacuum source.
Last edited:
- :
- 2003.5 Mazdaspeed Protege
Ok cool brian from was just trying to figure out some sizeing i guess
Last edited by a moderator:
It was. Only thing that changes during install is you now MUST attack the 2 middle upper bolts from the bottom. This was already how it was normally done when the fuel rail was pre installed. A gear wrench works or you can do the turn/flip/turn with an open-end. Everything else is perfect and you guys are going to love these things.
Yes.
Wrong spot. He wants the 1/4" line for the PCV, which is the lone port on the front of the plenum.
Last edited:
Exactly.
Wes is the man. (bow)
bikingpro5
Member
- :
- 03 Protege5
Wrong spot. He wants the 1/4" line for the PCV, which is the lone port on the front of the plenum.
My mistake, either way a vacuum source is all he needed.
- Status
