Greddy Turbo Timer Problem

[bauer]

I had my greddy turbo timer installed. when i turn the ignition off, the engine will just turn-off while the timer is counting but the accessory is on. on the other hand when i turn the ignition on while the timer is counting down then turn the ignition off, then that's the time the engine will still be running. the only way for the timer to turn the engine off while counting down is for me to turn the ignition off, then turn it on again while the timer is counting down. can anyone help me on this problem? the car's electrician said that he did put the right wires and he showed me (while the acc is on) that there is current flowing (using a metal rod with a bulb on the end)

 

[TheJohnny]

there is a setting that needs to be changed.
http://www.greddy.com/ go to tech, and under Full Auto Turbo Timer

Line Switch Mode
This feature is used when count down does not properly operate.
It's on page 27 of the manual. Mine did somewhat the same thing until I did this and bingo... problem solved.

 

[LBM Turbo]

my turbo timer just stopped working. The blue light is on and every number is on the face. Is there a way to reset to turbo timer? Any other ideas?

 

[TheJohnny]

my turbo timer just stopped working. The blue light is on and every number is on the face. Is there a way to reset to turbo timer? Any other ideas?

So your saying the entire face is lit up with all different numbers and settings. If so, sounds like it took a dump on you.

 

[LBM Turbo]

thats not the response i was looking for. just want it to work

 

[bauer]

got the turbo timer working. the car has two ignition wires so what i did was hook the acc wire of the timer to the other ignition wire.

 

[TheJohnny]

I should of asked you how you had it wired. Anyway, good job, always feels good when you fix something yourself.