blueprotegelx
iZoom
- :
- 2003 Mazda Protege LX-T
Agreed! I don't have the budget to reach high horsepower, but if there was a s/c available i may be willing to consider it as it is unique!
Gauging Interest: Protege Supercharger
- Thread starter Captain KRM P5
- Start date
Agreed! I don't have the budget to reach high horsepower, but if there was a s/c available i may be willing to consider it as it is unique!
blueprotegelx
iZoom
- :
- 2003 Mazda Protege LX-T
bump
http://www.aaimotors.tw/Products/pDetail.aspx?pid=017D010001&cid=01&type=D
people in taiwan made a SC kit for tierra/323 a while back ago. In another forum, theMan said that it would work on protege...maybe it's a good reference.
I would start saving up for a reasonable priced SC kit that can get my auto p5 to 160-180whp at low boost reliably for sure!!!
any update on your kit?
people in taiwan made a SC kit for tierra/323 a while back ago. In another forum, theMan said that it would work on protege...maybe it's a good reference.
I would start saving up for a reasonable priced SC kit that can get my auto p5 to 160-180whp at low boost reliably for sure!!!
any update on your kit?
flat_black
Member
Ken, is there anything I can do to help with the development of this? As it stands, I'm not running AC (No compressor, any very little else on the car, in all honesty. =) Removed most things that weigh anything.) I'm a bit far away from you, but I'm more than happy to test some stuff out, and especially get some sort of EMS going on that will suit this; I'm anxious for a little more power out of the FS, at this point.
Anyway, let me know if you want another guinea pig, or anything of the sort!
Also, I vote for the Eaton MP45. *thumbsup*
Anyway, let me know if you want another guinea pig, or anything of the sort!
Also, I vote for the Eaton MP45. *thumbsup*
Last edited:
- :
- 2002 BJFW, 2007 BK3P, 1979 SA22C, 2005 BK3P
i spoke with rich about the project last week. its very much alive! a test/donor car would have to be in his area though, so if you are interested in visiting NM send a pm to 505zoom
blueprotegelx
iZoom
- :
- 2003 Mazda Protege LX-T
awesome ken! has anything been decided on the kit? the s/c itself/pulley/ems/etc.....i'm stoked. b/c if this is real i will start saving now!
SeminoleMan
Member
- :
- '03.5 Sunlight Silver P5
A/C is a must for me...waiting for more details.
- :
- 03.5 YLW MSP
blueprotegelx
iZoom
- :
- 2003 Mazda Protege LX-T
hopefully some specs and a replica can me produced here soon, and applied to a car willing to test the application and see what type of numbers it'll put out, etc
TXMazdaSpeeder
T is for Turbo
- :
- 2003 Black Mica MSP #566
Well my fiance is wanting a speed, maybe i could talk her into a mp3 and putting this kit on it? we shall see.
blueprotegelx
iZoom
- :
- 2003 Mazda Protege LX-T
bump...anything we can do to help?
- :
- 03.5 YLW MSP
bump
blueprotegelx
iZoom
- :
- 2003 Mazda Protege LX-T
bump
Enough already
I don't mean to be a D%ckhead, but what gives?
You posted this GI thread in Feb and its been 10 weeks since you even posted here.
Though I am certain u r very busy, U posted a GI thread, we all showed interested and then u evaporated.
This happened to me when u posted a GI thread for cams way back too.
http://www.mazdas247.com/forum/showthread.php?t=123624208
Note I am post #8 Feb '06 and still was interested 3 months later on post #80 asking for updates again and again for months (like in this thread).
Please s*** or get off the crapper. The tease is not helping anyone.
Sorry that sounds so harsh. But if u have too many irons in the fire, don't go posting GI threads about new projects u don't have time to get to.
Or at least let us know if u have dropped the project so we can stop dicking around.
(angel)
Ken,
I don't mean to be a D%ckhead, but what gives?
You posted this GI thread in Feb and its been 10 weeks since you even posted here.
Though I am certain u r very busy, U posted a GI thread, we all showed interested and then u evaporated.
This happened to me when u posted a GI thread for cams way back too.
http://www.mazdas247.com/forum/showthread.php?t=123624208
Note I am post #8 Feb '06 and still was interested 3 months later on post #80 asking for updates again and again for months (like in this thread).
Please s*** or get off the crapper. The tease is not helping anyone.
Sorry that sounds so harsh. But if u have too many irons in the fire, don't go posting GI threads about new projects u don't have time to get to.
Or at least let us know if u have dropped the project so we can stop dicking around.
(angel)
- :
- 2002 BJFW, 2007 BK3P, 1979 SA22C, 2005 BK3P
nice 
to the point to say the least.
i am ready to move forward, but keep in mind the project does not depend solely on me. i can only move forward when the other parties involved can equally move ahead. these aren't things i will be producing by hand. the cams thing evaporated for other reasons altogether.
that being said, i will approach the partners i have in this project with some renewed vigor this week and see what we can come up with.
to the point to say the least.i am ready to move forward, but keep in mind the project does not depend solely on me. i can only move forward when the other parties involved can equally move ahead. these aren't things i will be producing by hand. the cams thing evaporated for other reasons altogether.
that being said, i will approach the partners i have in this project with some renewed vigor this week and see what we can come up with.
