Forged Motorsports BOV

[20mazdaspeed03]

So i installed a forged motorsports bov and i have some stalling problem. but i like how it sounds and i was wondering if there is any way to stop the stallin??

 

[satyr36]

run BPV / BOV dual set up. do a search, many threads on it

 

[mgerst1]

also try putting one of the stiffer springs in

 

[20mazdaspeed03]

how do you put in a stiffer spring and where would i get one from??

 

[mgerst1]

should have come with it. they have the black spring installed when they ship it to you, they also send you a green spring and a red spring. the red is the stiffest and the green is in the middle

 

[20mazdaspeed03]

are you kidding me i didnt get any of that s***. would i have to buy a new one to get it cause i like how it sounds and dont really want to put on a bpv but if i buy the new one to get the springs which one would you suggest

 

[mgerst1]

buy mine it has all the springs and I am selling it with two free carbonfiber look license plate frames

 

[mgerst1]

when i had it i used the green spring that was just enough to help with some of the stalling but not too much where it wouldnt open

 

[wonderboy]

So even though forge says that their dual stage BOV kit will not cause stalling issues, you all had issues with it? Thats super lame.

 

[mgerst1]

yeah unless you run a dual setup or relocate maf it will stall when valve opens right before you come to a stop. it does not do it all the time when you use the right spring, so sometimes you have to tap the gas if you hear the valve open before you come to a stop.