Some pictures of the difference between the Assco and stock 1.6L flywheels other than more free revving and a few more horses across the board no other effect noted other than good stuff. With a six or four puck clutch you can slip the clutch all day to lay down the power and not have to worry about breaking anything and when its time to replace the friction discs it can be done cheaply and quickly compared to a new transmission.
OEM 14lbs vs. Aluminum 6lbs Flywheel
Friction side OEM 14lbs vs. Aluminum 6lbs Flywheel
Back side OEM 14lbs vs. Aluminum 6lbs Flywheel
FYI I have tons of 3gen and 1.6L stuff for sale parting out race car click album link in my sig at end of album is pitures of eveything for sale.
Thanks
No exhaust sorry unless you wanted to buy my Turbo set up desgined for a 3 gen 1.6L.
I'll include everything you see and new oil lines for the turbo (minus the exhaust flange which I'm selling separate so somebody can make their own 1.6 turbo header). The turbo is a custom Turbonetics T3/4 designed along with the header for the VE of the stock ZM motor spool up start at 2000 rpms. Turbo capable of 24 psi. The Deltagate external wastegate has 10 psi spring in it I'll include 4,6,8 pound springs with spacers and a manual boost controller also has it own down pipe. You'll need to configure your own intercooler pipes and modify the down pipe to mate with your exhaust system as my set up was for modified 1.6 race car. I'll include a some silicone couplers, tbolts clamps, and pipe to assistance in fabing the IC piping. Also included a intake pipe (turbo low pressure side) with an adapter for the MAF sensor is included along with filter. I'll also throw is a set of 440cc WRX injectors. All for $1000.00 free shipping
I'll include everything you see and new oil lines for the turbo (minus the exhaust flange which I'm selling separate so somebody can make their own 1.6 turbo header). The turbo is a custom Turbonetics T3/4 designed along with the header for the VE of the stock ZM motor spool up start at 2000 rpms. Turbo capable of 24 psi. The Deltagate external wastegate has 10 psi spring in it I'll include 4,6,8 pound springs with spacers and a manual boost controller also has it own down pipe. You'll need to configure your own intercooler pipes and modify the down pipe to mate with your exhaust system as my set up was for modified 1.6 race car. I'll include a some silicone couplers, tbolts clamps, and pipe to assistance in fabing the IC piping. Also included a intake pipe (turbo low pressure side) with an adapter for the MAF sensor is included along with filter. I'll also throw is a set of 440cc WRX injectors. All for $1000.00 free shipping
.
! I have both the turbo set up and the flywheel and clutch. I'm also including with the turbo set up a Snow Performance methanol injection kit. And with the flywheel and clutch if both at brought I'll include a B&M short shifter with Kart-boy bushings and a Stainless Steel Clutch line. 
