Extended studs for Mazda2

[Andres3165]

I did search and did not find a specific answer, will the ones for protege fit our 2's?

Thanks

Andres

 

[Tyrdstorm]

The Mazda 2 forum might be able to help a little more.

 

[WillD]

I moved this over to the Mazda2 section.

To answer your question, I would say yes they will work. I'm not 100% positive but I believe Mazda uses the same studs on all their cars. BTW ARP is a good brand for long wheel studs (2thumbs)

Hopefully someone else can confirm this 100%.

 

[XCLR8TN]

Are you looking for front studs?

The "correct" stud from ARP is for the REAR of a 1.8L (94-05) miata (the 1.6L uses the same smaller stud front/rear). Part # is 100-7720.

Nowhere online listed any extended studs for the 2 so I ordered a set for the earlier Miatas and they were way too small in diameter, the 1.8L REAR stud fits on the FRONT of the 2. I have not explored the rear, as I didn't need extended studs. I was running 15x9 +36 6UL wheels with a .25" spacer to clear the strut.

 

[XCLR8TN]

If you order front studs from the dealer, they are incorrect. I ordered one, and also one for a 91 miata (front). Much to my surprise, they were identical. But had different part numbers. I ordered front ARP studs for a miata.
When I had time I popped out a stud... totally wrong size!! OEM 2 front stud at the serrated diameter was .572". The stud the dealer ordered was .506". This won't work at all!

The dealer has the wrong part # in their system for our studs because the one I got and the one I pressed out of my 2011 2 did not match.

If you'd like to match up your protege studs, you'll need the serrated part to be .579"

The correct stud from ARP is for the REAR of a 1.8L miata (the 1.6L uses the same smaller stud front/rear): 2.75" long, .579" diameter.

 

[WillD]

Great info Jess!

 

[Andres3165]

Are you looking for front studs?

Front and rear

Thanks for the useful information

Andres

 

[XCLR8TN]

You're welcome!

If/when you find out what fits the rear, please post it in here

 

[Andres3165]

You're welcome!

If/when you find out what fits the rear, please post it in here

Well talking to Emilio at 949 Racing , he recommended to buy a rear bolt and measure it. So far I found the part # D65133062

Now who's going to get it first? just $7.17

The front one part #: D65233062

Andres

 

[XCLR8TN]

^For stock studs you mean? I don't know if that front # is the same one my dealer gave me (because I returned the stud), but it was 100% wrong and would not fit my 2....... despite what the parts computer said.

 

[Andres3165]

^For stock studs you mean? I don't know if that front # is the same one my dealer gave me (because I returned the stud), but it was 100% wrong and would not fit my 2....... despite what the parts computer said.

Just picked up the rear one, part # D651-33-062 , hope I don't have the same problem that you had. I was trying not have to remove one out of my car.

Have not measure it yet.

Andres

 

[XCLR8TN]

Updates?

 

[kwaits92]

The studs don't matchup cause Mazda changed the stud in the 2. Went to the dealership to have mine replaced over the weekend.
I don't recall them telling me what stud they used but I do know it was a Mazda part. So one of Mazda models DOES fit the front.