EBC install help.

[boosted3]

Got a Greddy P-spec B and am having trouble locating where to tap into fuel pressure regulator.
Any help would be appreciated.

 

[fourthmeal]

We don't have an FPR. You can't use that feature. Our CDFP has a built-in valve that regulates flow (and thus pressure), but you can't tap into it nor would you want to, since it is HIGH pressure.

 

[boosted3]

Thanks for the reply... okay, so ummm.. how do I hook this bad boy up then? I mean, just skipping that step seems a bit spooky to me. Is there an alternate way? or do you just skip it? That has to be plugged into the back of the profec, do I simply leave it open?

 

[fourthmeal]

search the MS3/3 threads for this, I know some people were talking about the ProfecB recently.

 

[boosted3]

I actually did and couldn't find the answer.. Perhaps I'm not too good at using the search feature. I'll try again.
Thanks again for the help.

 

[fourthmeal]

Found this

http://www.mazdas247.com/forum/showthread.php?t=123694391&highlight=profec

this,
http://www.mazdas247.com/forum/showthread.php?t=123692075&highlight=profec

and this
http://www.mazdas247.com/forum/showthread.php?t=123690051&highlight=profec

 

[boosted3]

Yeah, those are the same results I got. None of them tell me where to connect the vacuum line in place of a fuel pressure regulator, though.