tilt steeringwheel down fully
unscrew 2 phillips screws under the top of the dash (on the black plastic bezel)
pop the rest off slowly (each side has a clip)
unscrew 2 scrws on bottom of gauge cluster
unscrew 1 screw on top of gauge cluster (metal bracket)
pull forward on metal bracket
unscrew screw on metal bracket to cluster (to remove bracket)
Unclip electronic harnesses on top of cluster , i think there 2 or 3
pull cluster up and out (with bracket removed)
useing a screwdriver loosen the plastic cover from the cluster 1 at a time
careful not to break any of the clips. i just loosen one, pull it out a bit, move
to the next.
then replace rings (dont touch needles) and reverse.
voila.
hope this helps.