Blueprotegelx Turbo Build

[blueprotegelx]

hks ssqv as bov. i'm only running msp ecu. i have afc lying around, i will install next week since this stalling out issue is probably due to tune. i will try to get my bro to send engine pic.

Pics bro sent:

Under car view:

 

[JCell]

you shouldnt be having stalling issues, and if you are, dont tune them out

fix the problem, dont cover it

 

[JCell]

dual setup? where is the maf?

 

[blueprotegelx]

I have it as TB, MAF, BOV, Intercooler. I wonder if it's due to the closeness of the maf and bov?

 

[JCell]

how close are they? i have about 5 inches between mine and zero problems

 

[blueprotegelx]

They are right next to eachother. Advice? Should I add a piece of pipe in between?

 

[JCell]

i need pop up pictures....

 

[blueprotegelx]

That's all my bro sent me for now. I basically have it maf>coupler>bov pipe. so it's probably about 3"

 

[JCell]

whats sticking outta the intake?

 

[jamesk]

Finally man, you went turbo'd, lol. Congrats man, I am glad it worked out for you.

 

[blueprotegelx]

temporary bolt til i can block it properly. think could be partial vac leak? I didn't think that area was used and needed to be blocked.

 

[blueprotegelx]

Finally man, you went turbo'd, lol. Congrats man, I am glad it worked out for you.

All b/c of you going turbo it all began. lol

 

[JCell]

nah, it shouldnt be a problem

how are ur vac lines routed?

 

[mp3-79bronco]

its not near as fast as you thought it would be though was it?

 

[Dpwhitehead1]

what vac are you holding??

i THINK if i am seeing correct, that the maf/bov are WAY too close to each other.

can't you put the maf on the intake piping??

 

[blueprotegelx]

what vac are you holding??

i THINK if i am seeing correct, that the maf/bov are WAY too close to each other.

can't you put the maf on the intake piping??

nah, it shouldnt be a problem

how are ur vac lines routed?

Holding? Boost gauge? I don't think the vac gauge is working well. Seems it's hitting 5psi, but don't count me on that.

Vac block routes: one goes to wastegate, one goes to bov, one goes to boost gauge.

I will put maf on intake when i get back and put a piece of ic piping in place of maf's current location, then we can rule that out

 

[xJAZx]

so your putting the maf before the bov?

 

[blueprotegelx]

that's the current location. i will route to intake when i get back in order to rule out the closeness of the bov and maf.

 

[xJAZx]

so right now it going bov then maf then throttle body with no pipe between the bov and maf?

 

[xDJ DUBx]

When are you getting back?