Blitz DTT DC II display in PSI?

[MSP-4-ME]

Does the Blitz TURBO TIMER- DTT DC II display the Boost in PSI or just BARS? I checked their web-site but couldn't find the info.
Thanks,

Steve

 

[Heathen23]

Only in Bar, AGR#7 posted a conversion chart if you need it. Should be too hard to find in the MSP section.

 

[SuperSpud]

14.7 = 1 bar... go from there..

 

[Striker187]

actually, it doesn't even display boost in bar....it's hkpa....hectokilopascals....yeah go figure on that one (uhm)

 

[AGR]

Conversion chart

hkPA to psi conversion

.76 hkPa = 11.02 psi
.75 hkPa = 10.88 psi
.74 hkPa = 10.73 psi
.73 hkPa = 10.59 psi
.72 hkPa = 10.44 psi
.71 hkPa = 10.30 psi
.70 hkPa = 10.15 psi
.69 hkPa = 10.00 psi
.68 hkPa = 9.86 psi
.67 hkPa = 9.72 psi
.66 hkPa = 9.57 psi
.65 hkPa = 9.43 psi
.64 hkPa = 9.28 psi
.63 hkPa = 9.14 psi
.62 hkPa = 8.99 psi
.61 hkPa = 8.85 psi
.60 hkPa = 8.70 psi
.59 hkPa = 8.56 psi
.58 hkPa = 8.41 psi
.57 hkPa = 8.26 psi
.56 hkPa = 8.12 psi
.55 hkPa = 7.98 psi
.54 hkPa = 7.83 psi
.53 hkPa = 7.69 psi
.52 hkPa = 7.54 psi
.51 hkPa = 7.40 psi
.50 hkPa = 7.25 psi

 

[SirJaime]

Now Now Now AGR , thats the numbers ! Now How do The Bars read ? I know it can't be 14.7 per bars , or can it ?

 

[Striker187]

no no, bar as in the measurement unit of pressure, not a display bar. 1 bar (pressure unit) = 14.7 psi (pounds per square inch).

 

[SirJaime]

Ah........! are ( lol ) you sure ? Striker I get two bars @ idle , and still never get a pos. reading on my numbers. Always a neg.

 

[RYuReady]

How accurate is the boost gauge on the Blitz DTT? I'm thinking of buying a turbo timer and a boost gauge, but not sure if I should get them combined. If it isn't very accurate, then I will buy them separately. Any advice will be greatly appreciated.

 

[Bullit]

I just installed at Blitz DCII TT that I purchased from *************.com and I also have a Autometer Boost guage. They are fairly accurate going by AGR's chart and comparing the two gauges. Reacts very quick and easy to read the digital readout once you know how to read hkpa.

 

[ELEmental59437]

I just installed at Blitz DCII TT that I purchased from *************.com and I also have a Autometer Boost guage. They are fairly accurate going by AGR's chart and comparing the two gauges. Reacts very quick and easy to read the digital readout once you know how to read hkpa.

*************.com is the s***... Sam is definatly the guy to go to for parts...

 

[RYuReady]

Cool thanks. I found the DTT DCII for $114 at
http://www.turboimports.com/blitdttdctur.html

But if you guys had a good experience with
http://www.*************.com
I will pay the extra $11.

I will probably end up getting another boost gauge later but for now I think the Blitz DTT will be good. Thanks, again.

 

[jonnydoe48]

www.*************.com is really coming along. The site is a good source of products concerning the mazdaspeed. Sam has good customer service, too (in fact, really good). if you contact him he will be able to help you in install and if you have questions. haha i remember i screwed up my turbo timer install and he was the one to guide me through it.