Any help??

Scottscott

Member
:
06 Mazda 3
I have a 06 Mazda 3 that ran hot on me so I stop and let it cool. I filled it back up but now it will turn over but will not start?? Any idea what is going on???
 
Why did it run hot, how hot did it get (was the temp gauge pegged?) and for how long? A stuck-closed thermostat can result in a warped head. Another scenario could be that the timing belt jumped a tooth. How many miles are on your odometer?
 
Another scenario could be that the timing belt jumped a tooth.
The 3 uses timing chains not belts, the rest of what he said is right though. if you ran too hot too long you could have warped a head or even blown the motor (unlikely)
 
Last edited:
Why did it run hot, how hot did it get (was the temp gauge pegged?) and for how long? A stuck-closed thermostat can result in a warped head. Another scenario could be that the timing belt jumped a tooth. How many miles are on your odometer?

It hit the hot on the gauge then I pull over and lt cool then filled it back up with water.. I took the plugs out, one at a time, and turned it over and water is come out!! Blown head gasket???
 
It hit the hot on the gauge then I pull over and lt cool then filled it back up with water.. I took the plugs out, one at a time, and turned it over and water is come out!! Blown head gasket???
Yes, a blown head gasket is your culprit.
:(
 
Back