AFC-SplitSecond PSC1 Map Library

[noyesboy]

Ok someone said they thought it was PSC-1 020 i'm thinkin that was a type-o cause its psc1-001---009 im trying to figure out which one everyone is using so i can go ahead and order it ANY input would be great thanks

heres the site so u can see what im talkin about http://www.splitsec.com/products/calibrators2.htm

 

[Sport23]

It is the PSC-020 for the MSP. Here is the sticky that tells you the model number. AFC Scam

You can get it at Protege Garage. SSAFC or with timing control SSFTC

 

[jbrewer4639]

you can't just buy a afc from split second. I talked to the guys from split second and they explained that protegegarage's afc's from tailor made from our cars. you are ask them to make one for your msp buy it would be about 400$ no where near the 239$ you were probaly looking at.

 

[719prottege]

so what afr is optimal here guys? im hiting like 10-10.5 at 9psi, bogging like crazy... HELP!

 

[HKPRO5]

Yea thats not optimal. lol

11-11.5 is optimal. (i think so)

 

[719prottege]

cool thanks.

 

[719prottege]

so i installed it finally. how to i load the tune from my laptop to the ftc?

 

[Wagonbacker9]

so i installed it finally. how to i load the tune from my laptop to the ftc?

connect it via serial cable.

or voodoo magic.

Your choice.

 

[719prottege]

well i did that, but i mean what do i have to do on the computer or something? i am using windows 7 btw. the software seems to have loaded on the pc just fine...

 

[justanothermp5]

you should really go to the website and read the U-tune PDF, it explains everything in detail.
But what you do is connect to the ecu, car on engine off, once connected go to fuel map, then write to ECU, or read from ECU, whatever your trying to do

 

[719prottege]

^ i are confuesed. i will check out the webstite

 

[719prottege]

so is the stock map good for up to 10psi is what i read? or the "super map"?
also i am reading that pdf. where it says to connect to the ftc on the right and it gives me like 8 ports what do i do?

 

[J_Naoto]

whichever com port you have the usb or serial wire hooked up to on the computer

 

[justanothermp5]

try each com port until you find one that works, each port on your computer has a different COM #
and the superstock map is actually good up to 13-14psi, thts what I was running when I had the stock turbo

 

[Wagonbacker9]

try each com port until you find one that works, each port on your computer has a different COM #
and the superstock map is actually good up to 13-14psi, thts what I was running when I had the stock turbo

I wouldn't say this is recommended, unless a new lower end build is in your future plans and budget.

 

[justanothermp5]

oh..yea forgot to mention, i have forged pistons and rods...
<< says it right there, but i guess its easy to miss

 

[719prottege]

lol got it. wagon just likes to bust balls. thanks, i will do after work. what happens if i try every port and it doesnt work?

 

[Wagonbacker9]

oh..yea forgot to mention, i have forged pistons and rods...
<< says it right there, but i guess its easy to miss

people read s*** out of context. I prefer the better safe than sorry approach.

 

[719prottege]

so i have the software downloaded, and i try to connect using all 8 ports... no go. any help?

 

[719prottege]

could it be that i am using a serial>usb?