cougar10agREDUX
Member
- :
- 2003 Protege ES-T
let us know how that works out.. i was thinking about sending my old coils to okada projects and see what they can do with them.
2.0 conversion to 1.8 Coil Packs
- Thread starter njaremka
- Start date
let us know how that works out.. i was thinking about sending my old coils to okada projects and see what they can do with them.
Maxx Mazda
Contributor
- :
- Stock P5
I'm gonna convert to coil on plug and go away from the waste spark system (4 coils) and use the Haltech to control them. The LS1 coils I mean.
cougar10agREDUX
Member
- :
- 2003 Protege ES-T
but waste spark gives you mad backfire and gurgle on deceleration which = race car. lol
Maxx Mazda
Contributor
- :
- Stock P5
Pulling a s*** ton of timing under decel and dumping in a ton of fuel does that too. It's how anti-lag systems work. With the Haltech if I wanted, I can make the spark fire while the exhaust valve is still open, and shoot some sick flames.
shane02pro5
25ish_psi
- :
- New Caney TX
That could come in handy!
- :
- -- 03 P5 / 23 CX-5 --
Somebody mounted theirs where the cruise control was. There's a pic in one of the threads, maybe back in this one somewhere.
Yeah, I looked all over and can't seem to find any info, however there is a pic on page 2 of this topic that a guy has it installed on the side of the motor. I thinking of installing mine over the intake manifold area or the rear or the motor instead. The only thing that I'm worried about is the length of the wires itself that will limit where I can install.
I'm turbo'ed by the way and the front of the motor on top of my log manifold is just too hot.
- :
- -- 03 P5 / 23 CX-5 --
Mine are up front where you don't want them for yours but I undid the coil wires from the harness all the way from passenger side of motor all the way accross the firewall side to the TB (about 2 feet) then taped it all back up then loomed up the uncovered coil wires & ran them up front to the coils. Depends on where you put yours but undoing the wires from the harness that far should allow at least a coupla possibilities within reach of the freed wiring.........http://www.msprotege.com/members/i12drivemyMP5/RAD_CVR1.JPG
All the part numbers are on page 2 of this thread, LOL
Anyone have any more info of relocating the 1.8L coils?
LOL shows how lazy i really am
thank you btw for locating it for me
heres a repost of the part#s for lazy ppl like me
fatti03msp
Contributor
- :
- 03 MSP & 91 RX-7 & 00 1500
well i did the conversion today and heres some pics to show where i mounted it up at.
- :
- 03.5 YLW MSP
Dont have CC I see and whats with the little filter by the battery against the firewall?
fatti03msp
Contributor
- :
- 03 MSP & 91 RX-7 & 00 1500
Whats CC, its a lil early for me, and i think the filter is connected to my intake lol, im not real sure there was a reason y its like that i just cant remember. I think its for the stock BPV pipe thats on the intake.
fatti03msp
Contributor
- :
- 03 MSP & 91 RX-7 & 00 1500
ok wow i feel stupid lol. But ya no CC for me.
- :
- 03.5 YLW MSP
cool I did not know that.
New Threads and Articles
-
Mazda Connect Firmware update stuck at 19–21% and frozen radio
- By StePago
- Replies: 2
-
-