windows stopped working

ms6acton

Member
Contributor
:
2006 Mazdaspeed 6
so i get into my car yesterday afternoon, and all of the windows except the drivers side just stopped working. none of them budge. dirvers works completely fine tho. anyone else ever have this happen?
 
You have to reset them. Do a search for it its here somewhere. Basically hold each individual (not driver contronls) windows button down for like 5 seconds. Usually you here a little click. Then hold it up for 5 seconds. Do the same on the drivers control. Play around with holding them up / down and they should start working.
 
yea,...i had that happen be4...hold the driver side .....hold it up 4 6 second.....should reset the window.......the dealer told me this....and works....
 
yea i have done that for the driver side before. but this time it was all the other windows minus the driverside one. so im going to have to do that tactic on the other ones one at a time
 
u dont need to do it for 6 seconds....just hold it up until u hear 2 clicks. shouldnt take more than a second after going up
 
so i tried the hold down/ up trick while sitting at each individual window, and nothing. all three windows still do not work. i tried from the driver seat controls too again and nothing. i dont even get a click from any of them
 
.
 

Attachments

  • bsod.webp
    bsod.webp
    21.4 KB · Views: 220
Did you check the window lock switch, you might have it on

lol i did check the switch. and i got them to work today. i checked the fuses and they were fine. and just before i took it to the dealer i tried the reset thing one more time and it worked.

i dont kno what i did differently because i did the exact same thing as yesterday. but it fixed it and i guess thats a good thing :D
 
I can't get my rear windows working. Anyone know how to reset them?? Ive held each of them down and up for 6 seconds. They work at each individual door but not at the drivers control. Ive reset my front 2 windows but the backs wont work !
 
Back