What have you done to your P5 today?

[Tengo]

Want the sub?

naw im god, unless its free lol, oh and have you thought about a DG lip? to make the front look a little bit more heavy and fuller, since you have the wide body kit and all

 

[reynoldsrobbie]

naw im god, unless its free lol, oh and have you thought about a DG lip? to make the front look a little bit more heavy and fuller, since you have the wide body kit and all

My next things in line are the front and rear lip. Id give you the sub if you pay shipping.

 

[Tengo]

did it come with extra wiring? where would it connect to? i no thing much at all about audio, just know how to turn my speckers up,lol

 

[reynoldsrobbie]

did it come with extra wiring? where would it connect to? i no thing much at all about audio, just know how to turn my speckers up,lol

its plug and play. It has a plastic wire harness plug. I was ran into the left side rear wheel well. If you have the wiring, it plugs in. Ill gladly give it away. Its been out since like the second month of ownership, which would be like September 2003...LOL!

 

[Kansei]

p.s. kansei, your sig scares me

yay

today I installed my oil pressure gauge sender, ran the wires for all the gauge sensors into the cabin, and dropped over 100 dollars at sears on taps and other misc tools. uggh I hope one of the taps in this set matches what I need for the turbo manifold. If I could figure out a way to get the last bolt of my corksport downpipe bolted to the turbo, I could be mounting stuff up right now >_<

 

[Tengo]

pm me a shipping quote to 33624, i bet i dont have that wiring though in my left side rear well like u stated.

 

[redpr5]

I gave her a nice bath today!

love the widebody kit!! did you put spacers in to move the wheels out more so that theyre flush with the widebody kit? or did you just get wider wheels?
car looks super clean man! nice work!
id like to know how that hood does in water with an sri, cuz i really like it, but i dont wanna suck water into my engine

 

[02pro5wagon]

reynolds did you have to remove the antenna mount before installing? if so how did that go

 

[reynoldsrobbie]

love the widebody kit!! did you put spacers in to move the wheels out more so that theyre flush with the widebody kit? or did you just get wider wheels?
car looks super clean man! nice work!
id like to know how that hood does in water with an sri, cuz i really like it, but i dont wanna suck water into my engine

I have pretty wide wheels and a offset which puts them out farther. As far as the water it has a little plate that blocks the water (kinda like a diffuser? plate or something. I live in Cali anyways! LOL!

 

[reynoldsrobbie]

reynolds did you have to remove the antenna mount before installing? if so how did that go

I didnt have to remove it, but I did so that I could run my Sirius though the roof instead of going in between the hatch and body. It was simple. Took me like 5 minutes, but you do need a spare hand when putting it back on!

 

[02pro5wagon]

oo thanks i see the directions on the site i think i want one of those now too its on my list of summer purchases when i get back to work

 

[reynoldsrobbie]

oo thanks i see the directions on the site i think i want one of those now too its on my list of summer purchases when i get back to work

did you get the link for the place that I went through? It even comes painted with the correct color code!

 

[redpr5]

I have pretty wide wheels and a offset which puts them out farther. As far as the water it has a little plate that blocks the water (kinda like a diffuser? plate or something. I live in Cali anyways! LOL!

gotcha. the car looks good tho. and yea im gonna be movin down to florida for college in august, and i really wanna put that hood on. you dont have any problems driving through rain do you?

im lookin at a set of 17x7 kyowa racing kr 316s, and i wanna do the dg widebody kit, only prob is idt the wheels are offset enough to where they would meet up with the sides of the car, id probably have to put in spacers
17x7.5 says ET38 but 18x7.5 says ET40, 42, 45.
would the 18s fit, cuz thats what i really wanna run

 

[reynoldsrobbie]

gotcha. the car looks good tho. and yea im gonna be movin down to florida for college in august, and i really wanna put that hood on. you dont have any problems driving through rain do you?

im lookin at a set of 17x7 kyowa racing kr 316s, and i wanna do the dg widebody kit, only prob is idt the wheels are offset enough to where they would meet up with the sides of the car, id probably have to put in spacers

yeah, Im running 18x8 Sportmax's. Havent sucked in water yet. It has only rained twice since I got it so....

 

[redpr5]

yeah, Im running 18x8 Sportmax's. Havent sucked in water yet. It has only rained twice since I got it so....

ah so 18x7.5 should fit pretty good then. ill check the fitment guide. did you have to roll your fenders?
and thats good that you havent sucked in water yet, hopefully it stays that way.
what would you get, black or gun metal?
pics below
http://wheelswest.ca/search.htm
check out that (click the big yellow link) and you can play around with puttin different wheels on different cars. it lets you paint the car, tint the windows and drop it so you can get the best feel for how your car will look with the selected wheels

 

[reynoldsrobbie]

ah so 18x7.5 should fit pretty good then. ill check the fitment guide. did you have to roll your fenders?
and thats good that you havent sucked in water yet, hopefully it stays that way.
what would you get, black or gun metal?
pics below
http://wheelswest.ca/search.htm
check out that (click the big yellow link) and you can play around with puttin different wheels on different cars. it lets you paint the car, tint the windows and drop it so you can get the best feel for how your car will look with the selected wheels

I love gunmetal! It looks great with the CF. and yes I rolled the fenders!

 

[Kansei]

well I'm bummed, I can't seem to get the last stud hole between my manifold and turbo tapped properly

 

[Tengo]

ah so 18x7.5 should fit pretty good then. ill check the fitment guide. did you have to roll your fenders?
and thats good that you havent sucked in water yet, hopefully it stays that way.
what would you get, black or gun metal?
pics below
http://wheelswest.ca/search.htm
check out that (click the big yellow link) and you can play around with puttin different wheels on different cars. it lets you paint the car, tint the windows and drop it so you can get the best feel for how your car will look with the selected wheels

arnt those djdannys rims?

 

[redpr5]

I love gunmetal! It looks great with the CF. and yes I rolled the fenders!

yea it really does. i cant decide between the black or the gun metal. ill probably do gun metal, since black wheels are almost impossible to keep clean. plus i think itll look just as good as black wheels on a red car. im just hopin that the wheels will fit, cuz rishies guide says that with 215/35/18 tires on a 7.5" wide rim you should have a +48 offset or higher, but im gonna run a 215/40/18 tire on the 7.5" wide rim, so hopefully the +45 offset will work and not rub TOO bad, but i know ill have to have the fenders rolled
but what does ET40, 42, 45 mean? does that just mean that theres 3 different offsets available or what?

 

[reynoldsrobbie]

yea it really does. i cant decide between the black or the gun metal. ill probably do gun metal, since black wheels are almost impossible to keep clean. plus i think itll look just as good as black wheels on a red car. im just hopin that the wheels will fit, cuz rishies guide says that with 215/35/18 tires on a 7.5" wide rim you should have a +48 offset or higher, but im gonna run a 215/40/18 tire on the 7.5" wide rim, so hopefully the +45 offset will work and not rub TOO bad, but i know ill have to have the fenders rolled
but what does ET40, 42, 45 mean? does that just mean that theres 3 different offsets available or what?

yes on the offsets