the hardest part of the rear IMO is just getting the endlinks off, youll need an Allen key and wrench and if there is any corrosion on them, soak them with PB blaster like crazy, then they should come out pretty easily after that its swing down sway bar, and springs are out haha then just 3 bolts to get the rear shocks off
then for the fronts the hard part is getting the strut out of the lower control arm (might not be proper name but youll see what i mean when the wheel is off) best way to get that off is to spray some PB blaster, leave the top strut mount attached and hit the control arm down with a hammer after that you can take the bolts out of the top mount and drop it out, then hit the spring compressors on the fronts to get the top mount off and then its just repeating what you did to get everything off haha