Freaking LOUD!!!

Pololo_MS3

Member
:
Mazdaspeed 3
So I just finished changing the front brake pads on my MS3 (stock ones lasted 30K.. not bad!!) and I bought a "barely used" set of pads from one of the members here...

The pads are the Hawk Plus and I know they are great but damnnnn they are LOUD!!! I could tolerate some noise here and there but this is just waaay too much... for a DD car.

I am used to "street/track" pads as I have used this dual setup in the past. Very familiar to Axxiss Ultimate, Carbotech and even EBC.

Any suggestions? Are there any ways to quiet them down a bit? and I am sure you all have seen this question, but which one will really fit the dual purpose yet stay relatively quiet?

Thanks
Carlos
 
Try driving with carbotech track pads. I sound like a school bus all the time. HP+ are not super bad, just break them in correctly. They will squeal alittle.
 
Like squeeking? Did you seat the pads after install?

Yes!! squeeking very loud when I hit the brakes. I did a "proper" bedding ... so good that I even manage to closely lock the brakes. :) Yes, these brake pads are awesome but I don't think I can live with the squeeking... :(

Should I remove the pads, sand them, put grease in the back and install them again?

Carlos
 
Yes!! squeeking very loud when I hit the brakes. I did a "proper" bedding ... so good that I even manage to closely lock the brakes. :) Yes, these brake pads are awesome but I don't think I can live with the squeeking... :(

Should I remove the pads, sand them, put grease in the back and install them again?

Carlos

Not sure if sanding's gonna help. A little bit more grease on the backing plate never hurts.
 
performance pads normally squeal alot
but i have EBC greenstuff pads and i have no squealing at all, no grease on the backs or anything
they never squealed as far as i remember, ive had them for a while now, 2 sets
 

New Threads and Articles

Back