Aftermarket partout 2002 Protege

[TFMMC]

Does anyone know if that 626mani works with stock fuelrail and injectors? thanx

It does, Jerry had it installed for a while but it just didn't provide much help without a turbo.

 

[mini_FD]

original post updated

 

[mini_FD]

i have the 626 fuel rail and injectors up on op

 

[Jack Rot]

got my item today, thanks!

 

[ScratchNSniff]

Just wondering, but how many miles are on the Coilovers...

 

[justanothermp5]

also which teins are those? im assuming the basics but just to make sure...

 

[TFMMC]

the teins have 65000 on them and stil are very very good. i can take sharp TURNS like the first day at high speeds. great suspension coil overs and would buy them again on my new car

They're basics

 

[mini_FD]

thanks again tfmms

 

[mini_FD]

thanks again tfmms Worked a double today and tom Trying to pick up shifts to help out the down payment.. glad to here your item got there quickly. get back to me to let me know how it feels

 

[TFMMC]

Damn Jerry, you're workin' like you want that WRX or something

 

[Tungsten6]

hey wants the yata

 

[Jack Rot]

You did have the intake on a p5 correct?

 

[TFMMC]

It was on a sedan, theres NO difference what so ever though... did you run into any problems?

 

[racerx43269]

any word on the header?.... sent out the valve cover to dstmsp03.... was 24 bucks via ups.

 

[Jack Rot]

it just looks like really small piping 2 1/4 inches.... going to install in the morning, are all the injen's that small in diameter?

 

[TFMMC]

it just looks like really small piping 2 1/4 inches.... going to install in the morning, are all the injen's that small in diameter?

I don't know if they're all that small but I do know its a real injen and it will fit your P5.

 

[stevew145]

Is the strut bar still available?

 

[racerx43269]

hmm... no word on the header.... tried textin ya... but no luck.. called too went to voice mail... any word?

 

[racerx43269]

thought the non fouler was comming with the header? ....

 

[racerx43269]

It should be.



There isn't a place for the second o2 in the header so why would there be a non-fouler? Anyways, its like $2 in parts at NAPA to make one. You'll need a bung welded into the midpipe, thought we already talked about this? :/




BTW, Jerry... your o2 you posted up with your non-fouler attachment is done wrong. Fatti and I noticed it when we took it off the car, you do know you were suposed to use both non-foulers right? The first one has to get drilled through and the second screwed onto the end, you only had the one dilled through... which makes it useless.

there should be a second spot... maybe i didnt look at the pictures right, but with factory there is one at the TOP of the manifold and one on the j pipe... none on the mid pipe.
either way... ill make one.. no worries