Mazdaspeed2oo35 Engine Build Round 2

[fishdonotbounce]

I hate you. That is all.

 

[Mazdaspeed2oo35]

Quick question, anybody out there selling Medieval Lightweight Crank Pulley stock diameter ? Please let me know, im urgently interested on buying one !!!!! please PM me or Post here thank you !!!

 

[Speed3.5]

ask ken at PG , i got one of stock size and light weight too, Medieval has another version of stock size that's out as well and even lighter then its previous model.

 

[Mazdaspeed2oo35]

ask ken at PG , i got one of stock size and light weight too, Medieval has another version of stock size that's out as well and even lighter then its previous model.

Well, Medieval dont answer emails and that stops me from buying anything from them, about ken its almost the same hes very busy and almost dont answer back pms or emails but ill try, what about yours, which one do you have, are you willing to sell it ? how much ? shipping quote to Malaga 29620 SPAIN, do you have any pictures Thank you..

 

[Mazdaspeed2oo35]

Finally bought my Steering column pod and Autometer C2 Water temp gauge to complete my interior gauges... im going to relocate my AEM wideband to the column pod and just put the water gauge in the place of the wideband in the autometer triple gauge pod all the way up..

im still trying to source a medieval crank pulley but no one seems to have one for sale.. cmon people i need one badly ----

 

[Maxx Mazda]

Protegegarage sells them!

 

[Mazdaspeed2oo35]

Protegegarage sells them!

The crank pulley ? they dont ken told me they dont deal with medieval anymore...

 

[Mazdaspeed2oo35]

not much but a little update.

Went to the shop this morning and found out they are getting everything ready for assembly. we got the custom head gasket from Germany yesterday according to them this gasket will hold 45+psi of boost, and the custom racing bearings are discard because they take to damn long to make them since there is no demand for them for my specific engine here in Europe so i got them from ************* ACL racing bearings instead.. here are few pics..

 

[fishdonotbounce]

Man I am envious. Wanna send over those old rods and pistons of yours since you're using new ones? I'll pay for shipping

 

[Mazdaspeed2oo35]

Man I am envious. Wanna send over those old rods and pistons of yours since you're using new ones? I'll pay for shipping

Well i can sell you my old Aries pistons they are in very good shape and condition as well as a brand new 0.75" Cometic head gasket if you like.. i'm using my pauter rods for this new project of mine..

 

[fishdonotbounce]

Haha I will keep that in mind but for now my setup doesn't require any forged goodies. I was kinda messing around. In a few years that should all change

 

[Mazdaspeed2oo35]

This is what a Professional Steam Detail Engine Cleaning can do to an engine and engine bay. I do this for living and really enjoy and love my job !!!!

Before and After Pictures with my professional engine dressing products..

By the way this was done by me, not a google picture just in case somebody might think its not legit !!! lol lol​

 

[BMXbmw]

Very nice! I used to have a Volvo 850. The only major problems with them were a poor PCV system hidden under the IM that when left unmaintained will blow out the rear main seal and on automatics they usually lose reverse a little after 150,000. Very nice ride though and you can get it for a fraction of its original cost. How long did it take to clean?

 

[SeR_Cyclops]

When are you coming down to KY and steaming my car? cause im waiting and I want it done before the 1st HAHAHA jk jk.

 

[Mazdaspeed2oo35]

this is a Honda CR-V Interior i did, im only posting dash pictures before and after, cause if not ill run out of storage space with all the pics i have of jobs ive done..

 

[Mazdaspeed2oo35]

Very nice! I used to have a Volvo 850. The only major problems with them were a poor PCV system hidden under the IM that when left unmaintained will blow out the rear main seal and on automatics they usually lose reverse a little after 150,000. Very nice ride though and you can get it for a fraction of its original cost. How long did it take to clean?

took me around 40 minutes to Steam the whole engine and engine bay and 8 minutes to hydrate and dress all of the hoses, and plastics in the engine bay..

 

[BMXbmw]

You made that CR-V look new! (thumb) I detailed my friend's mom's 2006 VW Passat 2.0T the other day. Takes me a long time though. She was happy with the special care I took, unlike some places she has taken it to.

 

[Mazdaspeed2oo35]

My lady before and after pictures so you can see the insane difference of what a Steam Wash and wax can do..

Before:

After

This is what i actually do for living here in SPAIN i have my own company and the only one that does this type of detail steam wash in SPAIN, Professional Mobile Detail Steam Cleaning and disinfecting Cars​

 

[StealthWyvern]

Nice job man!!! Want to make a trip back to fl and do my cars? lmao It does look good!

 

[Mazdaspeed2oo35]

You made that CR-V look new! (thumb) I detailed my friend's mom's 2006 VW Passat 2.0T the other day. Takes me a long time though. She was happy with the special care I took, unlike some places she has taken it to.

Yeah bro. the best thing is that i love what i do you know, so things comes out even better... if you knew how much i charge you will not believe it. for a Complete detail Steam wash, wax and disinfection of the interior runs for 85 Euros, to clean the seats with another machine that removes stain and disinfect thats another 150 Euros, and to clean the engine its 48 Euros.

Thats a total of: 283 Euros= $ 399.03 and people pays for it and sometimes i get tips... this is done at their places without spilling any water or anything on the floor or driveway, no soap or any chemicals used to clean exterior just pure Steam and Micro-Fiber cloths and thats it. and after it I wax it with a Special Teflon Wax also applied with a Micro-Fiber Cloths.. the results are just priceless...