My Show/AutoX P5 build
- Thread starter mazdaspeed777
- Start date
- :
- 03' Mazda Protege 5
Yah I think I am going to have to just bite the bullet and save for the Microtech, it will be my best bet to try and get to 200whp.
- :
- 03' Mazda Protege 5
Started an NA build thread to keep track of more performence modifications for any of you who want to check it out:
http://www.mazdas247.com/forum/showthread.php?t=123692733
http://www.mazdas247.com/forum/showthread.php?t=123692733
- :
- 03' Mazda Protege 5
Replaced the stock steering wheel with this new TenzoR titanium leather steering wheel:
This will be good for show and autocross, win win there. I will be adding a carbon fiber center ring to it soon so it will look even sexier than this! Sorry for the bad pics, lost my memory card to the digital camera.
This will be good for show and autocross, win win there. I will be adding a carbon fiber center ring to it soon so it will look even sexier than this! Sorry for the bad pics, lost my memory card to the digital camera.
- :
- 03' Mazda Protege 5
Finally got and installed the HID kit my brother ordered me for christmas:
Passenger side ballast location:
Drivers side ballast location:
Before without HID's (keep in mind these are silverstar ultras and are pretty bright already):
After with HID's:
Passenger side ballast location:
Drivers side ballast location:
Before without HID's (keep in mind these are silverstar ultras and are pretty bright already):
After with HID's:
Replaced the stock steering wheel with this new TenzoR titanium leather steering wheel:
This will be good for show and autocross, win win there
I forget, isn't there something in the SCCA rulebook about replacing a steering wheel with an airbag with a steering wheel without one?
- :
- 03' Mazda Protege 5
Not sure??
- :
- 03' Mazda Protege 5
Sweet! Sell some of that stereo equipement you got lyeing around and you could buy a set. Make sure to buy them from a place in the US. Mine were straight from Jupan and it took forever to get them.
Not in FSP. Under 15.2, sec G it says any steering wheel may be used, and is not required to have an airbag or horn button. It's different for STS tho.
- :
- 03' Mazda Protege 5
I got 10K. They are as blue as you can go before purple.
- :
- 03' Mazda Protege 5
I added a carbon fiber horn ring to my TenzoR steering wheel:
Also got some new stock tails and tinted them becuause I did not like how my tails turned out after I tinted them again:
Also got some new stock tails and tinted them becuause I did not like how my tails turned out after I tinted them again:
I cut, welded, and installed my MSP Racing Beat axleback today to get rid of my Mazdaspeed axlback:
I am planning on getting this axleback then add header. How does msp rb axleback + header sound compared to mazdaspeed axleback without header? (in terms of droning, loudness etc)
- :
- 03' Mazda Protege 5
The mazdaspeed axleback without a header sounds pretty good compaired to with a header. But even without a header it still had a little highway drone. The RB MSP axleback is deffinately hands down the way to go. I have headers and a catless MAM midpipe and it still does not have any highway drone at all, and it has just the right amount of growl.
- :
- 2003 Yellow Beast
Updates?
- :
- 03' Mazda Protege 5
I have been focusing more on appearence mods lately. My tires are toast right now so I have not done much AutoX yet this year. Just got some MSP Racing Harts powdercoated so I am waiting to get tires for those. I will probably eventually get my stock wheels powdercoated as well and some new tires for them to use those as my exclusive autoX wheels. If you check this thread out you can see what I have been up to on the car lately:
http://www.mazdas247.com/forum/showthread.php?t=123707073
