GT3071R on a FS 2.0L

[Brach]

http://video.google.com/videoplay?docid=-8739471279263637590
MAM thumper kit with a 3071R. 18psi

When they where here it went 12.00 at 118mph on just 18psi. Next pass he broke an axle.

 

[2.0t03speed]

hmm does anyone know if a 30 series will fit in the stock location? i would think not because the compressor would be half way into the radiator

 

[Brach]

hmm does anyone know if a 30 series will fit in the stock location? i would think not because the compressor would be half way into the radiator

No.

 

[mazdaspeedwerx]

anyone making manifolds for bigger turbos other than hiboost? I have tried emailing them afew times with no reply.

 

[Blackrose]

Everything in there is such a tight fit. In order to get the 30/40r in there it has to be parrallel to the block. the thermostat housing had to be rotated. And of course smaller fans. Even with all this the clearences in there are tight. My DP is within MM of the AC. The edje of the compressor housing is less then a inch from the rad. There is tittle room for fancy angles like the stock turbo.

hmm does anyone know if a 30 series will fit in the stock location? i would think not because the compressor would be half way into the radiator

 

[Blackrose]

Also im running a corksport rad now so the compressor is withing MM of the rad. But it looks sooooo good.

 

[Brach]

anyone making manifolds for bigger turbos other than hiboost? I have tried emailing them afew times with no reply.

Good luck. The best has come and gone. I have 2 MAM Thumper manifolds and 1 MAM Tubualr MSP manifold

 

[Blackrose]

anyone making manifolds for bigger turbos other than hiboost? I have tried emailing them afew times with no reply.

There are a few things in the works. But I wouldnt hold my breath.

 

[mazdaspeedwerx]

Good luck. The best has come and gone. I have 2 MAM Thumper manifolds and 1 MAM Tubualr MSP manifold

would you be willing to sell a thumper mani

 

[Brach]

would you be willing to sell a thumper mani

I have had several people want one. I am going to use one and sell the other. I am asking $650 for the MAM Thumper manifold.

 

[ForceFed]

I just want the MAM Tublar MSP one.
Want to sell me that one?
PM me.

 

[Brach]

I just want the MAM Tublar MSP one.
Want to sell me that one?
PM me.

I was going to use the MAM MSP mani on my girls car, but decided not to. It's brand new and sitting in the box still. I bought it about 2 years ago for $825 shipped.