Mark's 2004 MSM Build
- Thread starter bazooka joe
- Start date
Sooo tempting to say something, no must be good.
princess peach
Member
- :
- '92 Miata, '06 MS6
That one is unmolested though
princess peach
Member
- :
- '92 Miata, '06 MS6
before you do that, can I has your turbo? (shady)
- :
- 92 & 16 Meyatas
new intercooler is here, off to the powder coater, tint and alarm system done
- :
- 92 & 16 Meyatas
new tank installed
[/URL][/IMG]
- :
- 92 & 16 Meyatas
Bruce, looks like if the job at the dealer ever goes south, you can go into comedy! Haha! 
- :
- 92 & 16 Meyatas
It's just a new intercooler... I had painted the otherone but it kept flaking off
- :
- 92 & 16 Meyatas
so ran around the autox course at LRP fri...what a great time...on the big course it's like running on a race track (speeds on the straight were 60+...and of course i was hitting the rev limiter), the only cones on the track were indicating where the best line was and the apex. at the end of the day we have four cars on the rack at once...i can up from behind on my buddies mustang and was "pushing" him around the track...good fun! passed a guy in a cts-v...he pulled to left and let me go by, this guy was spinning the tires all day. anyway, i came in 4th out of 25 cars all with much more power than me so i was pleased. i was 21.00 and the best time was mid 20's. great day! vid later
Last edited:
- :
- 92 & 16 Meyatas
oh ya, developed an exhaust leak at the end of the day, turns out to be a pretty reg problem with the msm's rear manifold nuts coming loose periodically. looking in to copper locking nuts...
- :
- 92 & 16 Meyatas
- :
- 92 & 16 Meyatas
