Looking to Lower my Ride

[NOTSPCY]

OK I need all of your help .

I am looking to lower my car but i dont want to do a drastic drop with the chance to destroy my Bc2 Kit . I was looking at the Tein S tech springs .

But i would like to get everyones opinion . Pictures would be very help full . I really just want less wheel gap and a lower stance .
Here are some pix of it with stock springs.

PLEASE HELP !(nailbyt)

 

[2k3 PrO RiDa]

S-tech's will drop the front about 2" so that may be too low for what you're wanting. They give your car a raked look and drop the rear somewhere around 1.5" I hear. I cant wait to get mine installed after all this bad weather goes away.

 

[jbiird317]

i like the teins a lot, had them since the summer and no problems yet...

ive also heard some good things about eibach prokit and the msp racing beat springs, but both of these will lower about 1.5" where the teins are more like 1.8-2"

 

[NOTSPCY]

So do you think the teins are to much of a drastic drop for my car if i am worried about my fiberglass kit ?

 

[mountjonas]

i think the tein s-techs would drop it too much. get espelirs or eibach pro-kits. some meatier tires would fill in the wheel gap a bit too. your tires look really thin.

 

[Breeegz]

This might answer your question...

on the other note, your BC2 kit looks sweet.

 

[NOTSPCY]

THANKS THIS HELPS ALOT. i think i am gonna get the falken springs . anyone know if these are any good

 

[truplayax14]

i got the eibach pro kit and it isnt drasticly low, its perfect, I just need bigger rims...
http://www.msprotege.com/forum/showthread.php?t=123624147

 

[DiS]

weird....I have Tein S-tech springs and I had 1.8 drop all around. My drop is even, front and rear

 

[InFeXIoN]

i have eibachs and tokico blues, the eibachs level ur car because its a 1.4 in the front and a 1.8 in the rear. Car comes raked from factory, but the suspension is nice specially after i installed the RB rear sway and the front is next.

 

[Buck]

cant go wrong with Eibach Pro Kit. One of the best set of springs on the market. Drop is perfect for your application and the handling is excellent. Won't sag or bounce like some other springs. I have them installed on my 03 Lx and even with my 15 inch stockers it looks alot better

 

[jbiird317]

weird....I have Tein S-tech springs and I had 1.8 drop all around. My drop is even, front and rear

yeah the teins drop 1.8 all around, but the car naturally has a forward rake so with the teins it maintains that forward rake despite an even drop