Front mount ?'s

[pbarton14]

i Installed a universal front mount just as it says to do on the how to , and I noticed that my front bumper sets out a little or further and looks like it's sagging at the fender. The how to didn't say what parts of the bumper to cut out so the intercooler sits without any stress on it

 

[Cleverfrog]

Trim to fit. Everyone's is different.

And there is a sag fix from acc thatll fix your sag

 

[bikingpro5]

in the corksport instructions for their FMIC it shows which 2 plastic tabs need to be trimmed in order for the front bumper to fit properly

 

[pbarton14]

Ok thank you I actually only trimmed one part for the piping but ill trim more!

 

[hornsfan10609]

Try putting an extra washer or two on the two screws that hold the bumper in the fenderwell. They get worn out after the bumper has been taken off a couple times and cause the infamous bumper sag.

 

[pbarton14]

and as of right now my bov is not recirculated and my maf is on the intake side. bov is on the cold side about 8 inches from the throtttle body. its wants to kill the car every time i put the car in neutral on the clutch in. do i need to relocate the bov to the cold side before the bov?
and also i have the intercooler piping ghettoed up where it goes around the battery and to the TB, i was wondering if anyone could direct me, or tell me where i can get a one piece 2.25 in pipe that is made to come from the TB possibly to the hole where the fmic piping comes from by the fender.
thanks guys

 

[pbarton14]

Anyone?

 

[Cmezz331]

if youre running full vta you need to relocate the maf at least 6" away from the TB on the cold pipe, the bov would then be on the FMIC side inbetween the maf and fmic about 6" away from the maf

 

[hornsfan10609]

If you haven't looked through this thread, you must.
http://www.mazdas247.com/forum/showthread.php?123759220-How-To-Ebay-FMIC

 

[pbarton14]

idk how to get a one piece pipe coming from the TB, im going to try to make one with scrap pipe i have and some alumiweld

 

[pbarton14]

Relocated my mad today and put an eBay Nov and it made a night and day difference a-frickin-mazing