AP help!

[Romo89]

so im planning on getting a COBB AP

and was wondering wat map i should run with these

modes
just wanna be safe thats all

thanks,ROmo89

AEM CAI,CS catless DP&RP,HKS BOV, CP-E turbo inlet

thanks

 

[onelsono]

the stage 2 is designed for a dp setup. but i also herd you need a fuelpump b4 you can run that. if anything run stage1 93 + SF. that is if you do put 93 in your car, if not than its stage1 91 + SF. the ap will tell you what mods the certain maps support..

 

[lavoiespeed3]

AP maps don't support BOV you will need to modify the map via ATR

 

[hugador]

Try this one: Stage2+MSCAI2 91 Octane. And like onelsono said try stage1 91 if Stage2 is giving you to much trouble.

 

[hugador]

AP maps don't support BOV you will need to modify the map via ATR

Good point. OP make sure you set your BOV to Recirculate.

 

[Romo89]

Good point. OP make sure you set your BOV to Recirculate.

alright thanks..

 

[Romo89]

just wanted to hear peoples opinions
and experiences they have had with this device..


please keep on posting
thanks

 

[onelsono]

with a tbe, pump upgrade, bpv, tip, and sri. and with a stage2 93 +sf map. my car made 303whp and 345wtq on the first pull. after the pro tune it made 315whp. and the protune was safer than the base map. ..just to give you a scenario of what you can get from a ap...

 

[KH06]

from experience i would take the bpv off. I had major fuel cut with a Turboxs catless exaust MSCAI and a HKS BOV. I was on stage2+ 93. once i put the stock bpv on i had no problems!