intake

  1. B

    2010 Mazda 3 2.5 K&N Cold Air Intake Issue

    I am currently having 2 issues with my newly installed CAI. The install itself went fine, however when I drive around and a come to slow down at a very low RPM (around 1000) I can hear a weird metal or plastic rattling noise coming from my car, does not sound like its from the engine though. I...
  2. CorkSport

    CorkSport Airbox for the 2010+ Mazda 3

    We are happy to announce we have the CorkSport SRI Airbox available again for the 2010+ Mazda 3s. -Derrick
  3. D

    Mazdaspeed3 Cobb SF Intake, OEM Filter Housing

    Sold my 2008 'Speed3 a few weeks ago. I just need to clear out some leftover parts. Cobb SF Intake - 40k miles (***SOLD***): Has a rub mark on the bottom and a little surface rust on the bracket. Comes with the Cobb license plate frame that I never used. OEM Filter Housing - 1k miles (Make...
  4. F

    Air Box Modding

    I've been reading alot regarding the various ways to mod my intake system. I'm new to modding and don't want to spend too much money to begin with. One option I am looking at is what's referred to as the "swiss cheese" air box mod. This involves drilling holes in the lower portion of the air box...
  5. I

    What is this part and do i need it?

    Only respond if you actually know what you're talking about.... its a little rectangular piece of metal mesh which from what I can see is just restricting air flow. It sits right after my k&n and before the MAF sensor. I just did a resonator delete which was a nice mod now I'm just looking...
  6. I

    What is this part and do i need it?

    Only answer if you actually know.... its like a medal mesh that sits after my k&N and before the MAF. I just did resonator delete. Just tryin to get more flow. I don't need opinions on whether or not to do it, just facts on whether or not it needs to be there. In my opinion it looks like...
  7. H

    WTB: Protege5 Intake

    Looking to get a cold air or short ram, Injen, K&N, AEM, etc. Would be great if you were in the Boston area so we don't need to ship it?
  8. J

    Simota Cold Air Intake

    I have a RActive intake now, is the Simota CAI from Protegegarage.com any better, or has anyone heard of it?
  9. C

    Custom cams (help/input) as well as manafold choice

    Ok ill start off with what this engine is going to have FS-DE block: .5mm over boor, 10.4:1 pistons polished and balanced crank all new tighter tollerance bearings aftermarket piston ring set FS-DE Head: Mild to medium port and polish 3 angle valve...
  10. O

    Stock parts off a 2008 MS3 (cat-back exhaust, turbo inlet, airbox)

    I have a few stock parts from my 2008 mazdaspeed 3. Stock cat-back exhaust (one cut as always)-exhaust was on for about 20,000-SOLD stock turbo inlet- was on for about 10,000- (40 OBO shipped) stock air box was on for about 9,000 (60 OBO shipped)------SOLD hit me up if you want anything I need...
  11. S

    SASK P5's P5 is gone sale

    So it has been over a month since i sold my P5 and i have my new(ish) car now, haha. anyway I've been putting this off but it is time to get rid of all my parts that i still have from the p5. Here is the list and prices (O.B.O.) + shipping. Everything is Sold 1.Mazda6 rear wiper arm/blade...
  12. P

    **WTB** bottom of stock airbox (2010)

    (attn)please let me know if you have the bottom piece of your stock airbox laying around and you're willing to sell it and for what price. (shipping to MI 48134) 2.5L engine THANKS!!!!!
  13. M

    ms3 parts for sale 2007-2009

    I have a Fujita CAI, awr adjustable sway bar endlinks (unused), and a a/c vent guage pod and boost/vac guage for sale. pm me if interested. Fujita CAI - $150.00 obo Sway bar endlinks - $105 obo guage and pod - $120 obo shipping not included if needed, pick up always welcome
  14. G

    BP Sheet Metal Aluminum Intake Manifold

    *SOLD* Custom made sheet metal aluminum intake. 70mm throttle body with a 4 wire TPS sensor $700
  15. V

    CP-E Intake Xcel Cold Air Intake for Cash or Cobb SRI trade

    CP-E Intake Xcel CAI for Paypal or Cobb SRI trade I am getting rid of my CP-E intake because I want a legal intake for California. I have Cobb shift knob and accessport so I might as well get the cobb SRI while I am at it. I am letting the CP-E Intake + CP-E Pre-Filter for 130$ shipped to...
  16. F

    Cold air/blow off valves

    So right now I have the stock air filter and I'm looking to get a new cold air intake and good blow off valves to pair it with. I have an '03 MSP. Suggestion? Where can I get these at the best price? here's my car: http://www.flickr.com/photos/gawes/sets/72157625294270020/
  17. M

    2007 Mazdaspeed 3 Cold Air Intake

    2007 Mazdaspeed 3 Cold Air Intake asking $220 Shipped. (drive2) SOLD!! More Images Shows the Protective shield broke off i am actually going have this fixed. Shield has Been fixed!!! [/URL] Uploaded with ImageShack.us[/IMG] More Images...
  18. T

    Protege 5 Air Intake Hose Cracked!

    Okay, so I'm finally fighting a few problems on my protege 5 after owning it for several years. For one, my air intake hose is cracked, and will need to be replaced. Normally I would be asking for a good aftermarket upgrade, but I'm unemployed right now, and have to do things on a budget. Can...
  19. T

    CAI - Injen or Fujita?

    (huh)I'm looking at two CAI's the Injen RD Series and the F5 Fujita. Any input, Pros-cons, comparisons, install pics would be appreiciated.
  20. CorkSport

    CorkSport 2010+ Mazdaspeed 3 SRI Airbox, Now available with a Carbon Fiber Lid

    We have just released an option carbon fiber lid for our 2010+ Mazdaspeed 3 Airbox. The price for the airbox with the carbon lid is $129. Here is a link for the Airbox -Derrick
Back