intake

Recently bought a Injen CAI for my 2015 Mazda 6 but I havent installed it yet because this mechanic was talking to me and told me that the filter on the end of it is too close to the ground and if i went in water as shallow as 2 inches that it could suck up water and ruin my engine, resulting in...

Okay there's been a lot of talk about the K&N 77-2583KS Cold Air Intake used for the Ford Edge Sport 3.7. I'm not here to debate the effectiveness of a Cold Air Intake. I like them, I believe in them, I installed one, I wish I could return one. I've installed them on my last two vehicles without...

Hey guys, Looking forward to buy the AutoExe Intake for the p5. Anybody got one?

I know you can buy like cold air intakes but i work at pep boys and i see the individual pieces that the full ones are made of is it the same if you build it separate? if so what all do i need ?

Thinking of putting a pod filter into my mazda 3 2008 and just wanted to know i seem to get the gist of how to install it however there was a youtube tutorial which the guy didnt put the tempature sensor back in a left it in there is that bad???? or can i do that too? Also any tips would be...

I'm having a hell of a time finding a full length cold air intake actually made for the 2012+ Mazda5. There's very little out there and when I do find something it's always for the older 2.3 Mazda 5. Pretty discouraging... I did a search of this forum and came up empty handed as far as stuff...

We are happy to announce our 3 inch intake for the Mazdaspeed 3. It is a bolt in for the 2010-2013 model MPS 3. Designed Specifically for Mazda: All CorkSport parts have been designed and tested specifically for Mazdas. True 3" MAF: Machined with a True 3" inside diameter MAF...

Hey friends- I have an 06 HB, that has a loose lower airbox assembly. Upon inspection, I'm missing the part identified in the attached photo. It's a rubber grommet that the posts from the bottom of the air box pop in to to hold it securely in place. I've searched this part with every term I can...

Im new to the community. I just bought a used P5 with a replaced motor with about 65k miles. Obviously it lacks power of any kind, about 130hp. I want to add an air intake, headers and a full exhaust system and a mishimoto radiator for extra cooling in the summers to increase hp and torque. Im...

Hi, guys I got a generic sri intake from eBay and it brought two small aluminum brackets which helped to hold the intake but it broke recently(lasted a year). Because of the setup I feel it shakes too much and from time to time the screws get a bit loose. I'm wondering if anyone knows where I...

Mainly interested in top half of air box assembly with mass airflow sensor. Thanks.

Help limit your CorkSport Short Ram Intake from sucking in hot air with the CorkSport SkyActiv Cold Air Box for the 2010+ Mazda 3 Skyactiv. By coupling your Short Ram Intake with a cold air box, you will see the benefits of the intake system without the pressure drops inherent to longer tube...

I found a good deal on craigslist for some cheap performance parts. I don't plan on putting anything in yet I just want to buy some parts while they are cheap then slowly piece everything together to put it in all at once. basically I am wondering which of these parts will work with my 2003 p5...

I had some misfire issues with my wagon but new spark plugs and coils fixed the issue. I recently ran an OBD2 scanner and two faults show up even after clearing them, although the vehicle idles and runs great. Current Fault Log ------------------ P0106: Manifold Absolute Pressure/Barometric...

I never bothered to check my intake tube because my car was running fine. I finally decided to check it just for the hell of it (I heard about the tube cracks about a year ago) and found two huge cracks going halfway around the tube. I taped it up for now while I order a new one. After taping...

Things I Need. 1. SSAFC Or Any Other Piggy/Stand Alone 2. 440cc Injectors(Got It) 3. Good Motor Mounts(Got It) 4. Intake ported with vtcs removed or aftermarket intake(Got It) Let Me know if you have what i need. Thanks!

So I plan on getting a 2005 mazda 3 automatic (maybe manual, most likely not though) and the first thing I was going to add to it was either a CAI or SRI. I'm leaning more towards the SRI though because i dont like the idea of hyrdrolock with a CAI. So as of right now even though a know CAI adds...

I bought a Weapon R air inatke to my Mazda Protege. Everything is working great but when I turn the wheel it comes out a really disturbing noise out of the intake. It goes like woot woot woot everytime in turn the wheel. Is driving me crazy... any suggestions??? :/

Hey guys! So I just recently bought a 2010 Mazda 3 5-Door Hatchback and I absolutely love it. I would like to slowly start to mod it. I'm looking into Cold Air Intakes but I'm just not sure which is the best for my car. Any advice would help, Thanks!

Lets just say I made a custom one and it didn't work out with my ecu etc...car runs like crap, but seems faster & sounds great haha. (it's much too large @ 3") I just want my good gas mileage back and my car to run somewhat normal haha. Please help!! I NEED THE FULL PIPING AS WELL AS THE FILTER...