intake

I am writing a review on this product because I have not been able to find any review for this in North America. It's either non-existent or no one has bothered to post about it. I took a leap of faith because I wasn't sure it was going to fit, arrive, or just be a huge waste of money. The...

𝗡𝗘𝗪 𝗣𝗥𝗢𝗗𝗨𝗖𝗧 𝗥𝗘𝗟𝗘𝗔𝗦𝗘!!! Make way for the new 4th Gen Mazda 3, CX30, and CX50 Non-Turbo Cold Air Box https://corksport.com/mazda-3-cold-air-box-2019.html 𝗧𝗵𝗲 𝗖𝗼𝗿𝗸𝗦𝗽𝗼𝗿𝘁 𝗔𝗶𝗿𝗯𝗼𝘅 Blocks out the hot air from the engine, leaving only the cooler, fresh air from the fender and OEM Air Scoop. This means...

Get the full intake set up in one package! https://corksport.com/mazda-3-turbo-short-ram-intake-system-combo.html $469.99 plus shipping

The CorkSport Turbo Inlet Pipe drastically increases the overall flow potential of your intake system to efficiently feed the turbocharger. This is done by innovative design, maximizing the space available to increase the cross sectional area of the turbo inlet pipe from the small OEM 2.5 inch...

I am selling an almost new, used for only for 2 weeks, Cork Sport Short Ram Intake for Mazda 6 or 2016+ Mazda CX-9 with the 2.5L turbo engine. Kit is complete and in like new condition, in original box, with instructions included. Nothing wrong with it. Nothing missing. Selling because my...

Hi Im looking for a custom intake manifold for my 2003 mp5, I alreday have the jspec one so Im looking for something better for my turbo setup,thanks

looking to buy the stock air intake, hose, air box etc. complete set to put in my 03 protege. please message me if available thanks. my vehicle is a 2003 mazda protege5 wagon.

Hello, This is my first post here I've been lurking some here and there. I bought a P5 (auto) in January as my first car and it's in pretty good shape. I want to replace the Cold air intake filter though, but I can't seem to find one that matches the one that it is currently installed. IF you...

Hey everyone, I'm new here, but not new to the P5. I've had it for a little over 2 years now and just recently came across a couple of problems. Hopefully someone can help out with one or all of these lol 1. When turning my steering wheel at idle there is a noticeable clicking/groaning sound. I...

Sold

Looking into putting some minor upgrades in my p5. I plan on getting tokico hps with tein springs. The stock intake just needs to go anyways. Hmu with what you got thanks. If i didn't see something in a previous post that's my bad. Appreciate the links. -Thanks

Started out at the start of the summer on a nice pleasant drive down to Pt. Colbourne. originally it was caused by stretched MAF sensor wires. when the code was cleared i had extremely erratic RPMs which actually got so bad i had to ride the clutch to my mechanics shop so that it wouldn't shake...

Brand new in box aFE Power Pro Dry S Panel Air Filter. Fits 2012+ Mazda 3 L4-2.0L/2.5L SkyActiv, 2014+ Mazda 6 L4-2.5L, 2013+ Mazda CX-5 2.0L/2.5L. $70.00 shipped

I saw a picture of a Mazda 3, where the owner relocated the MAF sensor with it's original housing, behind his SRI. Now, I thought to fabricate my own CAI using a HKS filter, along with a custom box and heat shield material. Question being, does the MAF sensor freak out? I'd love to hear from...

Hey all. So a few months ago, the CEL came on, car wasn't running any differently, no power loss, same mpg, etc. but I had it read at Autozone as I don't have a reader. code came up P2177, system too lean at off-idle, right bank. I waited on getting around to it, but finally did earlier today...

I am cleaning out storage and trying to sell some old OEM parts that I no longer need. All parts are located in Sammanish Washington. Prices DO NOT include shipping and priority will be given to local pickup sales. All parts came off the car in excellent working order and were only removed...

I'm selling this CAI purchased from ebay a while ago. I replaced the original filter with a K&N RE-0930 and also added the prefilter, because I used to drive in very dusty conditions. There's a rip in one of the couplings which needs replacing. The other coupling and the elbow are still good...

Quick apology for lengthiness, I want to be specific and every detail counts when trying to diagnose a problem. So over the course of a couple weeks I noticed that my P5 seemed to be hesitating slightly on hard accelerations, as if the car was just not putting out all of its power. No check...

So, I've got a 2002 Mazda Protege5 that's practically all stock. I've asked around to see where I should start upgrading it, and a lot of people have said a cold air intake is a good place to start. After some looking at the differences between CAI's and short ram intakes I found a short ram...

Hi folk. Im buying an intake for me 2. I saw the Ijen CAI on eBay but in the description it said That the intake only fit the maZda 2 with manual transmision. I have an Automatic. Anyone tried this intake on an automatic??? Thanks!! Pictures please!!