-
-
Ppcb replied to the thread Options for replacement Mirrors?.Oops,.. I guess I meant England, Australia and New Zealand. I'm not sure about Scotland and Ireland?
-
Ppcb replied to the thread Options for replacement Mirrors?.I remember a thread where a guy bought a new driver's side mirror and he could only see himself in the mirror. 😂 It took us while to...
-
Ppcb replied to the thread Options for replacement Mirrors?.The only thing I can add is, don't buy a mirror intended for the EU and Australian markets. The mirrors are angled differently because...
-
Ppcb replied to the thread KN Laser bad hesitation when warmed up - Please help!.That's what I did with the Seafoam when I first got my car. I think I used ½ a bottle in the gas tank and ½ a bottle up the brake...
-
Ppcb replied to the thread KN Laser bad hesitation when warmed up - Please help!.If you want to prevent this from happening to your pistons then I think you should try and keep it clean. There's not too much you...
-
-
Ppcb reacted to smithy8187's post in the thread KN Laser bad hesitation when warmed up - Please help! with
Like.
Hah gees. Funny I was thinking of using Seafoam on my other older car. Some people really swear by it. -
Ppcb replied to the thread KN Laser bad hesitation when warmed up - Please help!.I used Seafoam to flush my engine when I bought my car, then used half a can in with the new oil at every 5,000 km oil change. I also...
-
Ppcb reacted to smithy8187's post in the thread KN Laser bad hesitation when warmed up - Please help! with Like.
This will be my last log. Hopefully any future travelers from Google might stumble upon this and it might help them. I put the fuel...
-
Ppcb replied to the thread What have you done to your P5 today?.This will get rid of your code,.. (You should only need to use one.) The only problem with it, is that one particular brand of O2...
-
-
Ppcb replied to the thread Protege5 Intermediate shaft bearing size?.Here's a link to the FSM and the parts catalog,.. The bearing part number will be in there somewhere. http://www.floptical.net/mazda/
-
Ppcb replied to the thread KN Laser bad hesitation when warmed up - Please help!.Keep in mind that the ECU needs to relearn how to idle the car after the battery is disconnected...
-
Ppcb replied to the thread KN Laser bad hesitation when warmed up - Please help!.I remember someone that was having a similar issue. It turned out that the temperature sensor was covered in crap so the sensor wasn't...
-
-
Loading…
-
Loading…
-
Loading…
