What have you done to your P5 today?

[Outlawstar98]

Thats a ES 2.0L man.

 

[JDMJNKY]

Thats a ES 2.0L man.

Nice so get that block motor was still in!!!

 

[racerx43269]

Waiting for this stupid tsunami to pass over so they can get Hellaflush on the way.

wat tsunami?

 

[Outlawstar98]

Nice so get that block motor was still in!!!

LOL, no I already have a plan which I wont need a block.

 

[xDJ DUBx]

Thats not a 2.0L, the never put a 2.0L in the 99-00. Thats a 1.8L

 

[JDMJNKY]

Thats not a 2.0L, the never put a 2.0L in the 99-00. Thats a 1.8L

I was thinking tha same thing but wasn't too sure.

 

[xDJ DUBx]

yeah, 99-00 either have 1.6, which looks a lot different from a fs-de, or they have a 1.8 which looks exactly like a fs-de but isn't, easiest way to tell is the spark plug wire setup since the fs-de have coil packs on top of the vc.

 

[Outlawstar98]

yeah, 99-00 either have 1.6, which looks a lot different from a fs-de, or they have a 1.8 which looks exactly like a fs-de but isn't, easiest way to tell is the spark plug wire setup since the fs-de have coil packs on top of the vc.

ES has the 1.8, 1.6 for the DX and LX

Im just blind tonight...


So I guess it was true what my parents said about going blind 0.o

 

[JDMJNKY]

ES has the 1.8, 1.6 for the DX and LX

Im just blind tonight...


So I guess it was true what my parents said about going blind 0.o

It's ok an asian girl would make it all better

 

[Outlawstar98]

It's ok an asian girl would make it all better

Yes. She would be blind hahaha (naughty)

 

[JDMJNKY]

Yes. She would be blind hahaha (naughty)

lol right to go out with you should would have to be (nuts)

 

[thorracing271]

Spent a couple of hours futzing with the P5 trying to get rid of a mystery bang/clunk in the rear suspension. Found that a nut was missing from the rear swaybar bracket, went out and got new ones, replaced the missing nut and the one from the other side, and still have the noise. Soooooooo... I don't know what's making the noise! Grrrrrr....

Foolish I have this same problem, if you find out anything more will you please let me know?

 

[TWISFM]

got my alignment...for the moment... -1.7 for both in the rear...and -1 in the front..still tucking tire on a 214/45/17 17x7.5 +50..... now need to roll fenders and go low...wheres the best place for a fender roller... im thinkn about just buying one.

 

[JDMJNKY]

got my alignment...for the moment... -1.7 for both in the rear...and -1 in the front..still tucking tire on a 214/45/17 17x7.5 +50..... now need to roll fenders and go low...wheres the best place for a fender roller... im thinkn about just buying one.

I would say eastwood.If not just go to your local sporting good's store and buy a bat lol

http://search.eastwood.com/search?asug=&w=fender+roller&p=Q&ts=custom

 

[sube]

yea im tryin to stay positive about this whole thing, but its kinda tough not to be pissed off still

insurance already covered the 3 hour tow from charlotte to fayetteville so i doubt they will cover any of the damage to the roof,

If your car was vandalised it has to be covered under your comprehensive, you will pay a deductible but it should not affect your rates.This is assuming you have full coverage on your insurance.

Pat.

 

[vel]

I need to buy a hood. Anyone got one. Some one in florida would be nice as to keep shipping down but not limited to.

 

[Circuit]

Got her clay barred and waxed for Wekfest tomorrow. So damn clean =)

 

[HKPRO5]

wat tsunami?

There was a Tsunami heading for Hawaii a few hours ago. it ruined everyones day. ( oh btw it didn't show up) so Hellaflush got moved to tomorrow. =( good news is I'm going to see Bobby Lee at the local
comedy club. Lol

 

[azmp5]

hopefully changin an accessory belt and spark plugs in the morning.

 

[Lewis7789]

(rofl) (lol2) (rofl2)

That's one hell of a gap!

IIRC it's .044"

Not 43 mm...

haha! Doh! Yeah. Forgot the decimal and zero. Haha! I just put in new spark plugs and set them using my spark plug gauge tool which doesn't have the ".0" in front of the numbers, I just set them to 43mm. My bad.