- :
- '13 CWP MS3 & '16 Mazda6 GT
you cant get that on film...way to fast!
What have you done to your P5 today?
- Thread starter Tg5
- Start date
- :
- 2016 GT ST 47A
Can't always get what we want now, can we?
fishdonotbounce
Registered Zombie
- :
- 08.5 CWP Speed3
Sorry to bring it back up, but am I gonna need a new gasket for the axleback install?
maybe
They're cheap as hell, you might as well grab one. Depends on what condition they're in.
fishdonotbounce
Registered Zombie
- :
- 08.5 CWP Speed3
Cool thanks 
Local dealer should have them right?
Local dealer should have them right?Cool thanks
Sure, just bring anal lube with you. Advance auto / NAPA should have them at much better prices.
fishdonotbounce
Registered Zombie
- :
- 08.5 CWP Speed3
Lol cool. Thank you much.
fishdonotbounce
Registered Zombie
- :
- 08.5 CWP Speed3
Hey which one of these are the gasket?
http://www.partsamerica.com/Product...&ptset=A&searchfor=Exhaust+Pipe/Flange+Gasket
http://www.partsamerica.com/Product...&ptset=A&searchfor=Exhaust+Pipe/Flange+Gasket
I haven't touched the P5 exhaust in a REALLY long time, but I believe that this one is it:
http://www.partsamerica.com/productdetail.aspx?MfrCode=BAR&MfrPartNumber=0396055&PartType=97&PTSet=A
http://www.partsamerica.com/productdetail.aspx?MfrCode=BAR&MfrPartNumber=0396055&PartType=97&PTSet=A
Rockin03mp5
Member
- :
- '13 Mazda3 / '13 Edge / Your Mom
Got to love the rear brakes on the p5....
Had the same problem a few months ago.
Thrown pad ftl.
Had the same problem a few months ago.
Thrown pad ftl.
- :
- '13 CWP MS3 & '16 Mazda6 GT
just do the pads yourself 
Rockin03mp5
Member
- :
- '13 Mazda3 / '13 Edge / Your Mom
Just get to it before it puts a big gouge in the rotor, like mine did. I needed new ones anyways.
Just cut the bolt off with a saw. And install the new ones. Worry about the old and busted s*** later. I had to cut mine off. Took a couple hours...
I had to cut mine off at 15K miles!!! (braindead Just one of them, actually, but still.
Last edited:
- :
- 2016 GT ST 47A
I think maff is right....it has been so long since I did mine. I bought mine at a a local dealer and IIRC it was around $10.
That said I would also recommend buying one. Better to spend a few bucks and be prepared than take it off to find the oe crumbling apart (like mine did).
His didn't come with a gasket? That's a failure. Mine did.
Fishdonotbounce, you got ripped dude. Go back and require a gasket!
fishdonotbounce
Registered Zombie
- :
- 08.5 CWP Speed3
thanks for the help guys. i'm gonna go ahead and have them take the axleback off saturday and i'll buy the gasket tomorrow. I bought the exhaust off of a forum member so it didn't come with a new gasket. $5 for a gasket isn't bad though so I'm not worried.
As far as the mount goes, I didn't get the bolt that goes through the middle of the front mount with my mounts since I bought it off a fellow forum member so I would have to reuse my old bolt. That's why I didn't just cut it off yesterday. I'll have to look into where I can get one of those bolts and nuts some over the weekend. I'm not in as much of a hurry to get my front mount on as I am in getting my exhaust and struts put in. Tokico Blues just came in yesterday. It was like Christmas up until I couldn't replace the exhaust or motor mount. It was kinda like getting that shiny red bike and then having it get run over by a garbage truck the same day.
As far as the mount goes, I didn't get the bolt that goes through the middle of the front mount with my mounts since I bought it off a fellow forum member so I would have to reuse my old bolt. That's why I didn't just cut it off yesterday. I'll have to look into where I can get one of those bolts and nuts some over the weekend. I'm not in as much of a hurry to get my front mount on as I am in getting my exhaust and struts put in. Tokico Blues just came in yesterday. It was like Christmas up until I couldn't replace the exhaust or motor mount. It was kinda like getting that shiny red bike and then having it get run over by a garbage truck the same day.
