What have you done to your MSP today?

[NocturnalSpeed]

ah, yes. After test fitting my brother and I came to the conclusion that 17mm are perfect which is what you see above, but you could go with 15mm. Just beware with the latter... (eek) you'll be MAYBE 1mm away from touching the brake calipers.

 

[protege3690]

ah, yes. After test fitting my brother and I came to the conclusion that 17mm are perfect which is what you see above, but you could go with 15mm. Just beware with the latter... (eek) you'll be MAYBE 1mm away from touching the brake calipers.

so 17mm spacers??? wow. ARP exteneded studs?

 

[NocturnalSpeed]

I purchased the Ichiba 17mm with extended studs, yes.

 

[2.0t03speed]

looking good david!!!

 

[Driver_X]

So I finally got around to changing my motor mounts and replacing the waste gate actuator. i had three out of the four bad. the one by the raditor was completely shot.

only thing left now is to change out all four endlinks and front sway bar bushing. Any recommendations on where to get the endlinks? Not really looking to track the car, just looking to get ride of the clunking noise they make and the squeak.

Looking at local autozone.

 

[2.0t03speed]

the ford escape endlinks are supposed to be pretty good iirc.

 

[VIPMSP]

i need the clip the o2 sensor plugs into... ASAP

mine melted. only thing i need to be back up and running w/ my new exhaust/mani/DP setup...

 

[Jaleik]

i need the clip the o2 sensor plugs into... ASAP

mine melted. only thing i need to be back up and running w/ my new exhaust/mani/DP setup...

hardwire it?

 

[2.0t03speed]

hardwire it?

or just wire it with weather proof quick disconnects

 

[Spiced MSP]

my MAM melted mine, I cut the connector off of a 3rd gen at the local junkyard

 

[2.0t03speed]

lol you and 505zoom melting connectors w/ mam manifolds. i never had that problem when i had mine installed.

 

[Spiced MSP]

lol you and 505zoom melting connectors w/ mam manifolds. i never had that problem when i had mine installed.

lol, yeah my o2 wiring was a little too short. I just cut the connector off with enough extra wiring to give the o2 some slack when connected

 

[VIPMSP]

yeah i would go to a junkyard and attempt to find one.... but my MSP is my only car, and currently not running! and i'm constantly being bitched at for having to get rides to work... so im SOL. gotta either find somebody online who can overnight or i'll buy a new o2 sensor at advance auto to hardwire

 

[2.0t03speed]

yeah i would go to a junkyard and attempt to find one.... but my MSP is my only car, and currently not running! and i'm constantly being bitched at for having to get rides to work... so im SOL. gotta either find somebody online who can overnight or i'll buy a new o2 sensor at advance auto to hardwire

shoulda kept the titanium lol

 

[rally2003]

shoulda kept the titanium lol

^This

 

[VIPMSP]

nooo way. glad i got rid of that thing when i did. although i regret not stealing the 3" exhuast, because then i wouldn't have had to buy the perrin.

 

[rally2003]

With all of the part outs and wrecks that have destroyed our MSP's. I wonder how many are left out there?

 

[MSPBrett]

With all of the part outs and wrecks that have destroyed our MSP's. I wonder how many are left out there?

i wonder this everyday.

 

[Jaleik]

Are both transmission sensor plugged into something on the msp? I got the front one plugged in but I cant find anywhere to plug in the rear one and I dont remember if it was plugged anywhere. Is that sensor only for the other g25s that use a speedo ring? The transmission works great but im encountering an issue with the reverse sensor.

 

[VIPMSP]

got it back & drove it to work!

exhaust sounds greatttttt. except it fits soooo tight, my rear bumper vibrates sometimes. gotta figure something out for that. and still need an o2 sensor