What have you done to your MSP today?

[o0n8]

i must be the onlyl one thinks it looks good and clean as it sits.

I think it looks great, but that's the one thing I would change

 

[StealthWyvern]

Any pics of your 1.8L intake mani install coperspeed? Im also curious on how well it fits into the engine bay around teh brake booster setup.

 

[Outlawstar98]

Changed oil and tightened my exhaust yesterday. Damn gaskets keep burning up on my downpipe to midline connection, like wtf! Lol. But today when I get home I gotta fix my drivers side headlight, then going to be putting on some fenders

 

[NocturnalSpeed]

Changed oil and tightened my exhaust yesterday. Damn gaskets keep burning up on my downpipe to midline connection, like wtf! Lol. But today when I get home I gotta fix my drivers side headlight, then going to be putting on some fenders

Say wuuuut!? Is this what I thing it means...!? lol

 

[SCMP3]

Of course it does.....more cf for his car.....lol

Been pricing projector setups on theretrofitsouce.com looks like $320 +shipping for what I want. Got pulled over this past weekend cause my hids are too bright apparently. And then the officer went on to tell me they were illegal cause they we're not stock bulbs. So time for projectors and to make it look stock

 

[Valk]

for the effort id just look at mattv retrofits unless you have all the tools and some idea of what your doing. last i checked he was doing conversions to sedan lights starting at under $400.

 

[dkrazykracker32]

Picked up my wheels from being powder coated. Still need to have the centers sprayed black and get racing hart done in red. Man I missed driving my car, lol

 

[bikingpro5]

Of course it does.....more cf for his car.....lol

Been pricing projector setups on theretrofitsouce.com looks like $320 +shipping for what I want. Got pulled over this past weekend cause my hids are too bright apparently. And then the officer went on to tell me they were illegal cause they we're not stock bulbs. So time for projectors and to make it look stock

if you already have HIDS you only need to buy the projector/bulbs from the retrofit source, I just finished a set for my car and a buddies and cost less than 300 for both cars shipped to me..

for the effort id just look at mattv retrofits unless you have all the tools and some idea of what your doing. last i checked he was doing conversions to sedan lights starting at under $400.

hes not approved on here to sell anymore and its a long wait time..

 

[Outlawstar98]

Say wuuuut!? Is this what I thing it means...!? lol

Tee hee *flustered* you want sexy pic?

 

[NocturnalSpeed]

Tee hee *flustered* you want sexy pic?

Thanks you... but noo..that won't be necessary I'm hurting as it is..

 

[SeR_Cyclops]

I took my car to get a tire patched and when they were balancing the car they ******* broke my center cap. they thought it popped out and proceeded to beat it out with the handle of a screw driver, then they wanted to claim that it was like that. Needless to say they ordered me a new center cap.....

 

[will6946]

^dude that happened to me twice dumb ass mechanics.

 

[Outlawstar98]

Thanks you... but noo..that won't be necessary I'm hurting as it is..

well to bad:

 

[VIPMSP]

well to bad:

headlights/lip/fogs look great!!!

 

[StealthWyvern]

looks sick outlaw

 

[coperspeed]

any links to said dyno/thread/page?

The 1.8l intake manifold are pretty the same of the 2.0l intake manifold.. The EGR tube are the same of the 2.0l engine.. But the vaccum chamber are different vs the 2.0l intake, the fuel rail the 2.0l fit on the 1.8l intake too.. But no vtcs hole to weld or etc.. Port match, grind with a dremel and ready to install...

For the power band i have no pics or dyno.. But a friend have a 626 intake manifold on is msp.. But the dyno sheet are very different.. Max Power & Max torque are at high RPM.. The 1.8l intake have 2x more torque at mid RPM.. (VICS)

 

[Valk]

question. do i need some special tool to recompress the rear caliper piston or can i use a cclamp as with the front?

 

[SCMP3]

They have to be twisted in. I got this weird cube tool. It kinda sucks but it works.

 

[Valk]

well, what am i looking for at the tool store?

 

[StealthWyvern]

question. do i need some special tool to recompress the rear caliper piston or can i use a cclamp as with the front?

They ahve to be twisted in HOWEVER you need to back off that e-brake allen head bolt thing on the back of the caliper or it will never go in.