Fiji Mazda3
Member
- :
- 2014 Ford Focus ST
Me want.....
The Ohio Random Thread... aka We Should Probably Be Working
- Thread starter THE Phen
- Start date
Fiji Mazda3
Member
- :
- 2014 Ford Focus ST
Focus ST.
No, feel guilty. My fricking cholesterol just spiked. lol
princess peach
Member
- :
- '92 Miata, '06 MS6
I'm off to Yuma, AZ to enjoy some warm weather (and work a little). So long, suckas!
Fiji Mazda3
Member
- :
- 2014 Ford Focus ST
No, it's more of a dark blue in person. My camera had trouble picking up bright colors yesterday for some reason.
Last edited:
So I installed the 626 intake manifold on the MSP the yesterday. No vaccum leaks, but runs like crap. Does anyone have pics or info on how they did the sylnoids setup and throttle cable setup? I tried looking it up but was limited on pics. Thanks. The throttle screw is backed out and still idling high because the cableacts like it is being restricted and notreturning to the original position. Don't know if it is the placement or smething else. Yes I did hook up all the EGR crap figuring I wouldn't throw a cel, but that didn't work. I don't remember the codes we ran, but one was the idle being to high and the other was mass air flow/too high ofair volume in the intake. Anything that would be helpful?
Fiji Mazda3
Member
- :
- 2014 Ford Focus ST
For the most part, I think you're right. A lot of pictures I was taking came out incredibly blurry too. It's not like I suffer from Parkinson's or anything.
Although, this one turned out pretty good.
darkcambria
Member
- :
- 09 slowwagon 3/08.5 slowerwagon 3
For the most part, I think you're right. A lot of pictures I was taking came out incredibly blurry too. It's not like I suffer from Parkinson's or anything.
Although, this one turned out pretty good.
I despise Lexus's but that's hot. Even quoted for hotness.
I like the Focus ST but I want an RS. Especially with the specs they're talking about for the next gen.
I had the same problem. I literally stopped taking a camera with me to the auto shows unless it's Detroit, because pictures just sucked that bad.
youve never been to the pittsburgh shows, lighting in the convention center is pretty damn nice haha
Corey, did you adjust the throttle cable for more slack? There's a black plastic twist type of contraption that can unclip and release the slack. Sounds like your cable is just too tight and holding the butterfly open a bit and not letting it close completely.
As far as the VCTS and VRIS solenoids, i don't recall but you can find all that info in the workshop manual.
http://www.mazdas247.com/forum/showthread.php?123744856-3rd-Gen-Workshop-Manual-(P5-MSP-MP3-also)
As far as the VCTS and VRIS solenoids, i don't recall but you can find all that info in the workshop manual.
http://www.mazdas247.com/forum/showthread.php?123744856-3rd-Gen-Workshop-Manual-(P5-MSP-MP3-also)
Fiji Mazda3
Member
- :
- 2014 Ford Focus ST
I forgot I took one with my 3GS to send to Sunni.
