The 6 / MS6 Picture ONLY Thread (NO DISCUSSION!)

[Speed6GT]

Just a little update on mine...

 

[Talbot]

I know it doesn't show much of the car, but it was taken by one of my friends and I like it.

This one was taken with my camera on my phone, so picture quality isn't perfect. Right after a car wash.

Another phone picture.

One day soon I will take some more decent pics with my real camera.

 

[Koenig]

Well as a moderator on 24/7 I really shouldn't point people to other sites, but since there are only a few 6 forums, and only two major ones I think you are probably smart enough to figure out the answer.

I missed this but yeah.... I only frequent 2 6 forums, this and the other (2 thumbs)

Any one tell me were i can get those lights thanks

Talking about the foglights or the headlights? the fog lights just look like a bulb replacement. The headlights are the Raptor Halo lights, you can buy them here.... therpmstore.com

 

[thepoint4life23]

how do i make them have the red lights in it light the ones in the pic

 

[Koenig]

how do i make them have the red lights in it light the ones in the pic

That's different, that's the little bulb used from the "parking" light.... the first light setting you switch on before it turns your headlights on is called the parking light

that's just a different colored bulb.

So far I've seen 4 sets of lights on this car

the fog lights on the bumper... the normal beam lights and the parking lights and then the high beam lights.

 

[m4tic]

any close ups i like this mod also, you should post a "how to", did it take you long, and what is it made of? thanks

just went to home depot, got some garage door sealer (white/orange bag) and some 3m heavy duty double sided tape. put the tape on the rubber garage sealer and stick it on the car, slowly...

*clickable

 

[Koenig]

Did you also remove the black plastic piece at the bottom of the bumper or is that still there?

 

[thepoint4life23]

so i would have to wire the parking light to go on with the headlight to do that or just can not be done

 

[Koenig]

*blows head off*


The parking lot is automatically part of the headlights... what kind of car do you own? A Mazdaspeed6..... A Mazda6 at least?

Think of them as "driving lights"

when you turn your lights on the little dim glow that you see in a Mazda6's headights... the ones on the inside..... closest to the grill.

See the lights turned on in this pictur?
http://pictures.topspeed.com/IMG/crop-380x252/07MAZDA6_5D_frt_7-8_dw.jpg

those are the parking lights, it just involves replacing a bulb to make it a different color, that's it. No rewire, nothing, I know a guy who has blue (he doesn't have those halo headlights that look like Bimmer lights, just the blue parking light)

 

[MAZDASPEED619]

here's a new pic of my speed

 

[Koenig]

here's a new pic of my speed

Nice, is that the home depot mod the other guy told about?

 

[Koenig]

so i would have to wire the parking light to go on with the headlight to do that or just can not be done

Hey man, I made it easier to explain it to you and easier for you to see what I'm talking about.

My car is a mazdaspeed6, but it's still the same headlight

That bulb is the "parking light" bulb... it's in the same housing as the high beam, all you need to do is replace that bulb with whatever colored bulb you want.

so far I have seen red, blue, yellow, and green.

 

[MAZDASPEED619]

Nice, is that the home depot mod the other guy told about?

it is the same I guess, I dont know what the other used but I only put it on the middle portion of the bumper only. I wanted something that would cover the CPE FMIC plate. Been on for about 3 months now with the heavy duty double sided 3m tape with no issues.

 

[RedBli$$]

and those bulbs are 194 bulb's. for the parking lights. ive changed mine to leds

 

[thepoint4life23]

ok i get that but will that light be on when my headlight is on so i will have a red glow with my angle eyes and i drive a mazda 6

 

[Koenig]

ok i get that but will that light be on when my headlight is on so i will have a red glow with my angle eyes and i drive a mazda 6

*blows head off again a 2nd time*


Yes it will, I already stated a couple of times that they come on when you turn your lights on.... whether you drive a mazda6/mazdaspeed6


You have nothing to worry about, just change the bulb

 

[Koenig]

and those bulbs are 194 bulb's. for the parking lights. ive changed mine to leds

what color and where did you get them?

I've been wanting to change mine to white LEDs to get a better brighter "white" look to them

 

[Koenig]

it is the same I guess, I dont know what the other used but I only put it on the middle portion of the bumper only. I wanted something that would cover the CPE FMIC plate. Been on for about 3 months now with the heavy duty double sided 3m tape with no issues.

oh? if you only did it on the middle part was is the part sticking out from the corners of the bumper then?

 

[RedBli$$]

ebay....i got a lot of 10 leds and i replaced all the dome lights, license plate lights, side markers, and the headlight ones.....or you can go to superbrightleds.com...just make sure for the headlights, you dont get a 194 bulb that has like 5 leds on them. i had ones like that and they didnt fit the little hole in the headlight because it had leds that suck out each side.

 

[Koenig]

ebay....i got a lot of 10 leds and i replaced all the dome lights, license plate lights, side markers, and the headlight ones.....or you can go to superbrightleds.com...just make sure for the headlights, you dont get a 194 bulb that has like 5 leds on them. i had ones like that and they didnt fit the little hole in the headlight because it had leds that suck out each side.

Thanks for the heads up on that bro.... so what did you end up going with? a single LED bulb for the 194?

I haven't taken them apart yet, but can you tell me what bulb is used for the dome and the interior lights (the ones at the base of the doors)

thanks