Speedie6 TIP $125

[dagmz6s]

Sold

Sold

 

[Atreyu3388]

Do you have all the hardware? Couplers, bolts, vac lines, etc...

 

[Mistersix]

man i cannot find any info on this thing anywhere. i remember seeing threads about it but now i cant find em. i wanna buy but i wanna know what the hell i'm buying first. naw mean!!!

 

[Marauder.45]

Tag, want to see the answer.

 

[BoostedSpd6]

some people have them..its like cobb's but only a hard pipe..made out of aluminum not silicone.. it will be louder then cobb's and cp-e's... if i didnt have cp-e's id grab this one quick for the price..

 

[dagmz6s]

all couplers and hardware are straight off the stock TIP, you reuse everything, thats the way Speedie designed it.

 

[Atreyu3388]

all couplers and hardware are straight off the stock TIP, you reuse everything, thats the way Speedie designed it.

When I swapped mine out, I don't remember there being a coupler from TIP to Turbo...just a hose clamp that was dedicated to the design of the Stock TIP. Correct me if I'm wrong, but I've done this swap before and that's what I remember. I don't see how a hose clamp would tighten aluminum onto the turbo...and I work with metal on a daily basis.

 

[dagmz6s]

that's how it was designed to work, you use the same coupler, there are even pics of it somewhere over on the other forum.

 

[chiefmg]

I have one, love it. This was the first one of it's kind available, all the others you see elsewhere (like eBay) came after this one. For those who don't know the story, a member over on another forum developed this for himself, then after a lot of requests had more made and sold them. It fits directly in place of the stocker, no need to get a smaller battery or anything. You will need a small piece of hose that goes on that barb (can't recall what it attaches to), otherwise as OP said you just reuse the stock clamps.

So this has been a long-winded (hopefully informative) bump!

 

[Killer]

OK...I cleaned up this thread, Please no flame baiting. If you do not have anything positive or productive to add...dont post.

Seller, try to get us some more info on this product so we can prevent this type of flame baiting.

Thanks.

 

[sunshineFC]

PM sent on other forum.
-a

 

[Marauder.45]

What's the difference between the CP-E and this one? Besides that this one is custom built by a private dude. There is some feature this one has that the other doesn't?

 

[crlsnlopes]

the CP-E and COBB are made of silicone and this one is made of aluminum

 

[Flightmedic]

all couplers and hardware are straight off the stock TIP, you reuse everything, thats the way Speedie designed it.

The speedie6 Inlet is supposed to come with the vacuum hose fitting, silicon vacuum hose and the T-bolt clamp for the turbo end. The connection to turbo is made with stock gasket, no silicone hose required, but the T-Bolt clamp replaces the stock hose clamp.