Rhino Ramps fit under stock Speed3?

[sierra248]

Anyone use rhino ramps with there speed3 for service and such? Do they rub when driving up? Also would it be possible to use 4 of them to get the whole car up in the air, they would have to fit in front of the rear wheels while on ground as you'd have to drive up all four at same time so i don't think this would work, but if anyone has these and would check or know already, I'd appreciate it. I need 2 anyway but there pretty cheap so i thought wth. Still need to know if they work just for front though!!!????

Tom
2007 Sunlight Silver Speed3 GT

 

[aaronc7]

i bought 2....not enough clearance would probably work if you put two pieces of wood in front of them to drive up onto first. I just returned them and bought a half decent jack and stand set

 

[exNeon]

you could get these instead, very popular with the lowered-car crowd.
http://www.raceramps.com/

 

[aaronc7]

wow...135 for the sport ramps and 199 for the race ramps, i would pass

 

[exNeon]

just trying to give you options

 

[BlackJack]

I brought the ramps from PepBoys and i attached some 2x4s to the front and it works just fine. I would put some anti-slip s*** on the wood though.

 

[BSTD3]

wow...135 for the sport ramps and 199 for the race ramps, i would pass

+1 very expensive pieces of plastic... 2 2x4's work just as great and I'd save way over $100+

 

[meha11]

I made these, their 12' long without the ramps.

I had to build another 8' ramp so i could get the MS3 up there without scraping the bottom.

My neighbours think i'm nuts with a 20' ramp.

 

[BSTD3]

Very cool ramps Meha11! (bowdown)

 

[Pirana]

Although this are not made to work under the car...they are meant to drive the car on them and use your jack, www.tomiokaracing.com They are $90 shipped on ebay.

 

[aciurczak]

Rhino ramps (8000) worked just fine for me; $35 for the pair at Kragens. Yes, the bottom dark plastic piece underneath the front air dam does lightly touch the ramp on the way up, but that's the same plastic piece that each one of us bounces off curbs and steep driveways from time to time anyway. The ramps left no mark underneath, and were so much easier to get the car up and down compared to using jacks and stands for simple front end work.

 

[civic si hb]

I made these, their 12' long without the ramps.

I had to build another 8' ramp so i could get the MS3 up there without scraping the bottom.

My neighbours think i'm nuts with a 20' ramp.

Nice ramps and the jeep and dog are pretty cool too

 

[Nutari]

Rhino ramps (8000) worked just fine for me; $35 for the pair at Kragens. Yes, the bottom dark plastic piece underneath the front air dam does lightly touch the ramp on the way up, but that's the same plastic piece that each one of us bounces off curbs and steep driveways from time to time anyway. The ramps left no mark underneath, and were so much easier to get the car up and down compared to using jacks and stands for simple front end work.

ditto. I use them for everything.. oil changes, downpipe.. etc