probe 2.0 block opposed to mazda 2.0

[TDRMP3]

i spun a rod bearing and i need a new block i couldnt find a protege block but i ran across a ford probe 2.0 4 cylinder engine for 350 bucks and i was told before that it is the same will i have any problems putting this in my protege will i need to change remove add anything at all?

 

[zoompastu]

i spun a rod bearing and i need a new block i couldnt find a protege block but i ran across a ford probe 2.0 4 cylinder engine for 350 bucks and i was told before that it is the same will i have any problems putting this in my protege will i need to change remove add anything at all?

What year probe And I don't think it will work cause those ones had a distributer. Wait are you useing just the block and your old head?

 

[TDRMP3]

What year probe And I don't think it will work cause those ones had a distributer. Wait are you useing just the block and your old head?

just the block not the head

 

[supa saiyan pr5]

same FS block.....but please do watch how many miles are on that used engine or you might be looking for a replacment for the replacement..lol


Jeremy

 

[lil_red_wagon]

same FS block.....but please do watch how many miles are on that used engine or you might be looking for a replacment for the replacement..lol


Jeremy

+1
i would just use the short block and ask him to pull the head and roll the crank to see if the cylinders scored at all.

 

[zoompastu]

So the block and internals are the same!!! cool LOLOLOLOL My local juckyard has 6 MX-6/probes/626 and is running 50% off all parts. I checked on it And It will cost $10 for the old school intake manifold for my turbo swap and I can get the short blocks for $50 each!!!

 

[lil_red_wagon]

i may have to send you some money to hold onto a block for me

 

[zoompastu]

I will see what I can do. I will probably sell some. but I need to see how many i can pull in a day. PM me and I'll get back to you on that