H-Town Speed
Member
- :
- 2003.5 Laser Blue MSP
Well I bought these lights at Pep Boys to go with the G3 plates that I recently bought. The plates and lights are installed and I've run all the wiring and hooked everything up except 1 wire, the one that needs to be patched into the cars factory low beam (+) wire. This is the wire that provides power to the switch only when the low beams come on. There are three wires on the factory wiring harness. Which one do I patch into:
1.Solid Red
2.Red/White Line
3.Red/Green Line
Thanks in advance,
H-Town Speed.
1.Solid Red
2.Red/White Line
3.Red/Green Line
Thanks in advance,
H-Town Speed.