My project with stock internals?

Oxygen

Member
:
MSP 2k3.5
Ok here's my project for next summer

FMIC
3" Exhaust/Downpipe
Ceramic Coated everywhere
Kevlar/Ceramic Clutch Kit
Lightweight Flywheel
Stock LSD Rebuilt
Piggy back
RR Racing UDP (Not sure if I'll install)
HKS SSQV
NOS Wet Kit

Already done (not much tho...)
9.5psi (EBC)
CAI
Ground Kit (from member here)
Brakes

I expect about 200-220whp on a daily driving, and 260-300whp with NOS.

My question is, do you think stock internals will be all right?? Don't tell me NOS isn't right for internals, I wanna learn something
Something else will blow in my face??

Thx!
 
More than likely no. Nitrous would be too much for the bottom end. I haven't seen anyone running it on their MSP, not even a 50 shot. Forget about the funny gas and just go about with your other additions. You'll enjoy your car a lot more that way and won't have to go deep in the pocket to rebuild should something go wrong. There are a lot of MSP making good power with the right mods and stock engines.
 
Ok, but it's a little bit "fuzzy" in my head right now about it....what about the rods? or the drivetrain??
 
Oxygen said:
Ok here's my project for next summer

FMIC
3" Exhaust/Downpipe
Ceramic Coated everywhere
Kevlar/Ceramic Clutch Kit
Lightweight Flywheel
Stock LSD Rebuilt
Piggy back
RR Racing UDP (Not sure if I'll install)
HKS SSQV
NOS Wet Kit

Already done (not much tho...)
9.5psi (EBC)
CAI
Ground Kit (from member here)
Brakes

I expect about 200-220whp on a daily driving, and 260-300whp with NOS.

My question is, do you think stock internals will be all right?? Don't tell me NOS isn't right for internals, I wanna learn something
Something else will blow in my face??

Thx!

Keep the NOS and get a spray bar. Use the NOS to cool the intercooler core.
 
9.5 psi sometimes, 8psi everyday

I actually lke pretty much the idea of MPNick about the spray bar. I'll keep that in mind :D

And I actually dont really care about BOOMing my engine, I can get another FS-DE for 200$ CAD and then I'll work this one out
 
yes like a million times

what your planning is alot of work and expensive, why? because you will be replacing the motor not to long after you do it
 
Oxygen said:
9.5 psi sometimes, 8psi everyday

I actually lke pretty much the idea of MPNick about the spray bar. I'll keep that in mind :D

And I actually dont really care about BOOMing my engine, I can get another FS-DE for 200$ CAD and then I'll work this one out


Even if you get a $200 engine to put in after you blow this one you won't get too much work done with a giant hole in the block.
 
tekkie said:
yes like a million times

what your planning is alot of work and expensive, why? because you will be replacing the motor not to long after you do it


exactly... so buy my car and save yourself thousands in the long run. (first)
 
Back