msp build parts (preview!!....:)

[Alejo_NIN]

on the oil cap, make shure you over tighten the little hex bolts, otherwise they'll come off like nothing
i have the exact same cap..and the bolts came off

 

[D-rock240]

Ebay MS cap FTL

Get a JDM MS cap, the gold one would look great with the valve cover.

 

[sandspeed]

sub. i love this car more than any msp on here.

tq

Dude, I love that valve cover. And that manifold is so hot! Hopefully I'll be able to come down to FL again once I'm boosted. Let me know if you come up to MD anytime soon.

Boosted sleeper ftw...nice! I'll probably be there in november and I'll be sure to hit you up.

how did i miss this - fun projects - you going to be able to see those cam gears?

very nice turbo set up man!

yes indeed..the cam gears will be visible. I'm starting to think the gold valve cover and the gold camgears are going to be a little over kill. I hope not...

anyway,



ksports arrived . .

 

[CitizenPro]

^ Awesome! Watch out with the adjustable endlink tabs, im on my 2nd set of AWR endlinks

 

[terbow]

awesome project. subscribble.

 

[L8R]

K-Sports... OH BOY. Good luck with that :]

Love the valve cover also. I think too much gold might be over kill also, but we shall see.

 

[sandspeed]

K-Sports... OH BOY. Good luck with that :]

Love the valve cover also. I think too much gold might be over kill also, but we shall see.

haha...yea I know I know. I got a really good deal on them so hopefully I get lucky with these .
Since were on the topic, the top-hat on the rear passenger coilover doesn't move at all. I can move it but it takes a great deal of pressure to rotate it. All the others move freely except this one. Did you ever encounter this?

 

[L8R]

Hmm, so while trying to rotate it? I can't recall anything or having a problem like that before. Hopefully it is something minor.

Also, if you want to try and run negative camber by adjusting the camber plates all the way in, it doesn't make a huge (visual) difference like how the JDM VIP cars or drift cars look.

 

[Jeph]

Just a bump for an old thread. I want to see my old parts being put to good use

 

[cmahlig]

where did you get that downpipe, how much did it cost to get it made?

 

[avarela86]

where did you get that downpipe, how much did it cost to get it made?

Did you ever know who MAM was? Do a search....

Just a bump for an old thread. I want to see my old parts being put to good use

They have been sitting and absorbing dust...he's been a little backed up. I'm dying to see the manifold installed.

 

[GhostMercury]

yea this is a pretty sweet build

 

[Jeph]

Yeah, the downpipe was built for me by Beau at MAM. Its a sweet piece, 3" all the way through.

 

[sandspeed]

Yeah, the downpipe was built for me by Beau at MAM. Its a sweet piece, 3" all the way through.

hey jeph, yes it is indeed a badass downpipe. Hopefully saturday I will have some more updates. If all goes as planned the external wastegate (tial 38mm) will be fabricated and will be connected from the manifold to the downpipe.
I've been thinking about just running a dump tube from the wastegate, might be a little loud but ..yea know.
Also, still waiting for the cylinder head to be finished.

 

[JCell]

where did you get your valve cover coated? i just painted my red and am less than satisfied with the result, and i'm afraid it might start to chip and what not in the near future....

 

[Jeph]

hey jeph, yes it is indeed a badass downpipe. Hopefully saturday I will have some more updates. If all goes as planned the external wastegate (tial 38mm) will be fabricated and will be connected from the manifold to the downpipe.
I've been thinking about just running a dump tube from the wastegate, might be a little loud but ..yea know.
Also, still waiting for the cylinder head to be finished.

Nice, you could re-route the exhaust flow back in farther down the exhaust so you don't disrupt flow too much. I would or else it will be wayyy loud.

 

[CitizenPro]

gimme that DP.

 

[Pirana]

Good stuff!!! on the Ksports...just make sure the pre-load in that spring is not too much and you should be able to move the top.

 

[sandspeed]

more fun parts

 

[GreyMan]

awesome cant wait for my build to start