motor build?

[mazdaspeedp]

So cant do the 2 way drain cuz if it clogs up my turbo seals are gone. My starter is also wrecked so im gonna have to find one at pick And pull or somthin.

 

[mazdaspeedp]

Bump picked up a new starter today. Also got a hks turbo timer. The oil pan will be coming off this week and getting the pickup doublechecked to make sure its gonna work with the awr pan. Also getting a second drain welded on for the oil system. Fuel pump should be in. Next after all this will be the haltech.

 

[mazdaspeedp]

 

[JaLMP5]

"Remanufactured in Mexico"

 

[mazdaspeedp]

"Remanufactured in Mexico"

Lol 5year warranty yo!

 

[mazdaspeedp]

So the haltech and ignition coils are next on the list. Dont know what im gonna do about this though the shop its at is sketching about the aem ignition coils

 

[BRIAN_MP5T]

The shop sounds like a bunch of retarded shop kids who left school at grade 9..



Or you could just PM me and I would send you something that looks like this.

Here is some information in regards to how to configure the Haltech PS1000 ECU and The AEM Twinfire Ignition system..

"Coils On Plug" BABY!

 

[mazdaspeedp]

Ok cool thanks man. Do you have any pictures of how you installed the haltech?

 

[CR3 Motorsports]

http://www.mp5t.com/?page_id=269

 

[malcantry]

nice install thread!

 

[BRIAN_MP5T]

Ok cool thanks man. Do you have any pictures of how you installed the haltech?

2011


2012

 

[mazdaspeedp]

2011

Is this in the door or trunk its hard to tell
2012

 

[bikingpro5]

top picture is where your passenger side air bag is.

 

[mazdaspeedp]

top picture is where your passenger side air bag is.

Oh ok cool. What about the bottom picture? I was thinking of getting the haltech mounted behind the cup tray in that small slot. And for the aem unit maybe in the glove box.

 

[bikingpro5]

Bottom is firewall with dash removed.

 

[mazdaspeedp]

Will i need that variable reluctor processor too?

 

[mazdaspeedp]

Thanks Brian. I sure hope i can get the haltech,aem coils and slimfans all wired up in the next week ir 2 here and try to get this thing running. Im also hoping the cylinder head wont cause any problems since it has a Fs-ze intake cam.

 

[mazdaspeedp]

2011


2012i like how clean all the wiring is. Really nice work here props.

 

[BRIAN_MP5T]

Thanks, I have it wired up so that all I need to do to remove the dash is disconnect the steering knuckle and then there are 8 bolts. Poof the dash comes out either left or right door and I get 100% access to all of the wiring if I need.

If I have a 12mm and a 14mm wrench, 10 minutes and the dash is out.

Will i need that variable reluctor processor too?

you mean RA-10.... Hopefully not..

 

[mazdaspeedp]

Bump rear sway bar,links and bushings are in, hearshield is on exhaust,o2 wideband will be installed this week and welded onto exhaust,aem coils are installed haltech will be up next! Also vacume lines and a few other small things! More pictures soon.