Mazdaspeed2oo35 Engine Build Round 2

[lowr3y]

wow, i really suck at internetz

 

[yellowmsp035]

bump? did i miss an update or something? what ever happened to the results?

 

[Blendercloud]

bump? did i miss an update or something? what ever happened to the results?

He's probably out driving it instead of posting about it.

 

[CulRidr]

And waiting for the IM to finish it up

 

[Alejo_NIN]

we need dyno!

 

[lowr3y]

we need dyno!

+1

 

[Mazdaspeed2oo35]

Thanks for keeping this thread alive. ive been very busy with work and family these days, but just you let you all know plans has changed a little... Im replacing my wossner pistons for 0.40 over Custom Racing Arias pistons with Swain Tech coating..... im going all out with this last build of mine, might also add a 50 shot Nos kit to make the 35R Spool earlier and harder im not sure yet, im about to place the order of the pistons with KEN at protegegarage but that is going to take 30 days for arias to make the custom pistons and Im also waiting for my 505zoom Intake manifold. im going to also replace my 1000cc Injectors for some 1200 or 1400cc ones, we still need to calculate how much more than 1000cc we need. Again we are not sure yet what are we going to upgrade i told my mechanic what want, now he needs to make the calculations.

ill try to keep this thread updated..

Thanks for watching guys highly appreciated....

 

[SeR_Cyclops]

Wow, what is wrong with the pistons in the car?

 

[shane02pro5]

I though max overbore was .020" unless thats .40mm. And by the way thats enough fuel for like 800whp with 1400cc injectors +meth too?

 

[Mazdaspeed2oo35]

I though max overbore was .020" unless thats .40mm. And by the way thats enough fuel for like 800whp with 1400cc injectors +meth too?

my current pistons are 83.5mm the ones i now need are 84mm which i believe is 0.40 over or i might be wrong ??? Either way i need 84mm pistons anyway..

 

[Mazdaspeed2oo35]

Wow, what is wrong with the pistons in the car?

Piston number 4 fail for some weird reason, i sent them to Germany to the manufacture to get them checked, but I want to go this time with only USA top notch s***. **** Germans. ARIAS this time all the way..

 

[shane02pro5]

Gotcha...you have us all on the edge of our seats waiting for the historical outcome!
(rei)

 

[Mazdaspeed2oo35]

Gotcha...you have us all on the edge of our seats waiting for the historical outcome!
(rei)

Thanks man... I'm going to place the order on the pistons next week, and by Christmas i should have my 505zoom intake Manifold here.. I will install all of my Lightweight pulleys including crank as well, i will also change the JET of the Methanol Kit to inject more Meth in the engine.. I hope everything goes well this time. honestly there is nothing like USA toys..

I can't wait to drive this thing in the road again.. i have few Private races awaiting you'll like the cars i'm going against with !!!!

 

[justanothermp5]

I though max overbore was .020" unless thats .40mm. And by the way thats enough fuel for like 800whp with 1400cc injectors +meth too?

hes getting custom ones so i guess thats why he can go over .020

but im sure the block can handle being bored over that much no problem, in my dads 1.8 GTI we bored it almost .090 over to fit 2.0 pistons lol it was part of a stroker kit

but anyways back on topic, mazdaspeed20035, you need to get those pistons ASAP so we can have some more videos of you beating up on lambos lol

 

[shane02pro5]

The fs cylinders are not evenly spaced and the wall between the middle two is extremely thin .090 ob would cut into the other cylinder.

 

[justanothermp5]

yea i know .090 wouldnt work on these engines, i doubt anybody would ever try that anyways lol

there was barely enough room in the GTI for .090, but we made it work

 

[Mazdaspeed2oo35]

hes getting custom ones so i guess thats why he can go over .020

but im sure the block can handle being bored over that much no problem, in my dads 1.8 GTI we bored it almost .090 over to fit 2.0 pistons lol it was part of a stroker kit

but anyways back on topic, mazdaspeed20035, you need to get those pistons ASAP so we can have some more videos of you beating up on lambos lol

Hahah. Thanks Man.. I'm currently Detailing cars to the Lamborghini Dealer here near where i live in SPAIN, the owner is pretty damn cool with me i told him what car i had, what i had done to it and that i have already beaten a Gallardo with my Mazda. he laughted and right after the conversation he promised me when i get my ride back at the road he will have few interesting toys to race me in their private track. Here is one of the toys they have prepared....... I better prepare my behind because it looks like hes not joking at all.. lol lol


This is one of the toys he told me, but he said a few so i don't know what else he have to kick my ass.. lol lol

And these are the ones i have detailed so far to them, i have more work and cars from them this upcoming week..

I look like s*** after working 12 straight ours detailing their 3 Lambos in one day.

These is what they have brand new ready for a new home !!!

Now this is my favorite, A Gallardo LP 560 All wheel Drive this special edition one sounds so insane. Jesus if i had money... Couldn't being said better. MONEY TALKS AND s*** WALKS !!!!!!!!!!!!!!!

​

 

[Alejo_NIN]

holy ****

 

[Bassmachine]

 

[Maxx Mazda]

Sorry to hear the engine blew again already. I thought those Wossner pistons were "top notch?" What happened to make them fail? Was it structural failire? Can you post pics?