Manifold Spacer

Hey guys I made some thermal spacers for my intake manifold project and since I had enough material I just went ahead and made a few extra spacers (2) so if anybody wants them, first one to come up with the $ gets em. I was thinking $40 each + shipping which shouldn't be bad since they weigh less than a pound. They're made of Garolite and are 1/4" thick.

[/IMG]

and here's a teaser of my intake manifold project for interesting conversation. I could make more of these if I had interest in them and they would most likely come with Jay Racing fuel rails from my last GB, be polished to a mirror and powder coated for protection against the elements. Also has the ability to use an aftermarket mustang style throttle body or the oem protege one. But this time I have to get proper credentials to sell which ill worry about that if there is intrest.

[/IMG]

 

[MALESKIMP3]

So after looking at the two tps's there is a great possibility that the mustang tps would work with the stock protege. They both work off a 5v ref and have corresponding ground and tp signal wires, (three total) so in theory everything should connect up nicely but I have no way of testing an verifying this tho.

Apparently, I've been under a rock of some sort. What I have interest in is that intake manifold/tb/fuel rail as well as a little somethin' somethin'... know what I mean? Yeah, that turbo manifold. WTB Info.

The intake and fuel rail were made by me at Jay Racing and the tb is a holley 86 mustang. I ran a group buy a while back fro the fuel rails as a kit and the Intake manifold is still in the testing stage. The turbo manifold is an OBX turbo manifold and will soon be removed from the car.